Dell PowerEdge C8000 Dell PowerEdge C8220X Hardware Owner's Manual - Page 221
Removing Memory Modules, CAUTION, WARNING
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Removing Memory Modules CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. WARNING: The memory modules are hot to the touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module. 1 Remove the sled from the enclosure. See "Removing a Sled" on page 141. 2 Open the sled. See "Removing the Front and Back Sled Covers" on page 161 or "Removing the Sled Cover" on page 166. 3 Remove the cooling shroud. See "Removing the Cooling Shroud" on page 210. 4 Locate the memory module sockets. See Figure 3-61. CAUTION: Handle each memory module only on either card edge, making sure not to touch the middle of the memory module. To avoid damaging components on the memory module, remove only one memory module at a time. 5 Simultaneously press down and out on the ejectors at both ends of the memory module socket until the module is released from the socket. See Figure 3-61. 6 Lift the module out of the socket. See Figure 3-61. Figure 3-61. Removing a Memory Module Installing System Components 221