Dell PowerEdge C8000 Dell PowerEdge C8220 Hardware Owner's Manual - Page 196
Table 5-1., System Board Jumper Settings, Jumper, Setting, Description
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Table 5-1. System Board Jumper Settings Item Jumper Setting Description 2 NVRAM clear (default) The configuration settings are retained at system boot. The configuration settings are cleared at the next system boot. 3 ME firmware recovery (default) The ME firmware recovery jumper is disabled. The ME firmware recovery jumper enables ME firmware recovery mode. 4 BIOS recovery (default) The BIOS recovery jumper is disabled. 5 Password enable The BIOS recovery jumper enables the BIOS flash memory special recovery mode. (default) The password feature is enabled. The password feature is disabled. 6 Power button pass (default) The BMC triggers a power button signal. The power button passthrough signal is triggered. 196 Jumpers and Connectors
196
Jumpers and Connectors
2
NVRAM clear
(default)
The configuration settings are retained at
system boot.
The configuration settings are cleared at
the next system boot.
3
ME firmware
recovery
(default)
The ME firmware recovery jumper is
disabled.
The ME firmware recovery jumper
enables ME firmware recovery mode.
4
BIOS recovery
(default)
The BIOS recovery jumper is disabled.
The BIOS recovery jumper enables the
BIOS flash memory special recovery
mode.
5
Password enable
(default)
The password feature is enabled.
The password feature is disabled.
6
Power button
pass
(default)
The BMC triggers a power button signal.
The power button passthrough signal is
triggered.
Table 5-1.
System Board Jumper Settings
Item
Jumper
Setting
Description