Dell PowerStore 3000X EMC PowerStore Initial Configuration Worksheet - Page 4

IP Addresses Required for Initial Configuration The following table lists the IP addresses required for each appliance in your cluster: Storage Network Per Appliance Management Network Per Appliance Network Node A Node B Appliance ESXi Host for Node A ESXi Host for Node B Total Required Per Appliance Node A iSCSI Target Node B iSCSI Target ESXi Node A iSCSI Initiator ESXi Node B iSCSI Initiator Total Required Per Appliance Node A Node B Total Required Per Appliance PowerStore T Model 1 1 1 N/A N/A 3 1 1 N/A N/A 2 N/A vMotion Network Grand Total Per Appliance 5 Cluster IP Address (Management Network) 1 PowerStore X Model 1 1 1 1 1 5 1 minimum, 2 recommended* 1 minimum, 2 recommended* 2 2 6 or 8* 1 1 2 17 1 Per Cluster Global Storage Discovery IP Address (Storage Network) 1 1 Grand Total Per Cluster 7 19 * - For storage network, at a minimum, you need 6 IP addresses for each PowerStore X model appliance. However, for performance improvements, it is highly recommended that you have 8 IP addresses for each PowerStore X model appliance. The information in this publication is provided "as is." Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any software described in this publication requires an applicable software license. © 2020 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Dell believes the information in this document is accurate as of its publication date. The information is subject to change without notice Dell EMC PowerStore Initial Configuration Worksheet Page 4 of 4