Dell PowerVault 210S Dell PowerVault Storage Systems Lock Bar Replacement - Page 6
NOTE: If the entire lock bar tube rotates while you are trying to remove - storage
View all Dell PowerVault 210S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
7. While facing the storage system, use a 9/64-inch Allen (hex) wrench to remove the screw on the right side of the lock bar tube (see Figure 4). With the Allen wrench, push into the tube to engage the screw head (the lock bar is spring-loaded on the opposite end). NOTE: If the entire lock bar tube rotates while you are trying to remove the screw, wrap some fabric or paper over the lock bar. Then grasp the wrapped section of the lock bar with a pair of pliers to hold the tube and prevent it from rotating while you remove the screw. lock bar tube screw )LJXUH5LJKW/RFN%DU6FUHZ 8. Use the Allen wrench to remove the screw on the left end of the lock bar tube (see Figure 5). screw internal lock bar lock bar tube spring )LJXUH/HIW/RFN%DU6FUHZ 9. Remove the internal lock bar and spring. 10. Remove the four screws on the left lock arm bracket and the four screws on the right lock arm bracket and remove them from the storage system. 4 Dell PowerVault 20xS Storage System Lock Bar Replacement