Dell PowerVault 51F Dell PowerVault 5xF Switches Zoning Guide - Page 32

This section discusses the configuration management commands, which allow you to configure the zones. The following example shows the cfgSave command, which writes a copy of the defined configuration and the name of the effective configuration to flash memory in all fabric switches: The saved configuration is automatically reloaded by the switch at system start-up. If a configuration was in effect when it was saved, the same configuration is reinstated with an automatic cfgEnable command. NOTE: Dell recommends saving after you enable and test a configuration. Any unsaved configuration will be lost if the system fails. The following example shows the cfgEnable command, which enables a specified configuration: The following example shows the cfgDisable command, which disables the current zone configuration: The fabric returns to a non-zoned mode, in which all devices see each other. 4-8 Dell PowerVault 5xF Switches Zoning Guide