Home » Dell Manuals » Storage Devices » Dell PowerVault 530F » Manual Viewer

Dell PowerVault 530F Rack Installation Guide

Dell PowerVault 530F Manual

View all Dell PowerVault 530F manuals

Add to My Manuals
Save this manual to your list of manuals

Dell PowerVault 530F manual content summary:

Dell PowerVault 530F | Rack Installation Guide - Page 1
Dell PowerVault 530F | Rack Installation Guide - Page 2
. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, RapidRails, PowerVault, and PowerEdge are trademarks of Dell. Other trademarks and trade names may be used in this document to
Dell PowerVault 530F | Rack Installation Guide - Page 3
safety and to help protect your server, storage system, or appliance from potential damage. Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type of your computer system. Observe the following caution and warnings while servicing this system: v
Dell PowerVault 530F | Rack Installation Guide - Page 4
technician. If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or contact your Dell authorized service provider: - The power cable, extension cable, or plug is damaged. - An object has fallen into the product. - The product has been exposed
Dell PowerVault 530F | Rack Installation Guide - Page 5
components, and never operate the product in a wet environment. If the computer gets wet, see the appropriate chapter in your troubleshooting guide or contact a Dell-authorized service provider. Do not push any objects into the openings of your system components. Doing so can cause fire or electric
Dell PowerVault 530F | Rack Installation Guide - Page 6
: Unless your installation and/or troubleshooting documentation specifically allows it, do done only by individuals who are qualified to service your computer or storage system equipment and hot-pluggable power supplies, if offered with your Dell product, observe the following guidelines: - Install
Dell PowerVault 530F | Rack Installation Guide - Page 7
supporting hardware. NOTE: Dell's servers, storage systems, and appliances are certified as components for use in Dell's rack cabinet using the Dell customer rack kit. The final installation of Dell to be installed in a Dell rack by trained service technicians. If you install the kit in
Dell PowerVault 530F | Rack Installation Guide - Page 8
controls, make adjustments, or perform procedures on a laser device other than those specified in the product's documentation. Only authorized service technicians should repair laser devices. Before you remove the computer covers, perform the following steps in the sequence indicated. 1. Turn
Dell PowerVault 530F | Rack Installation Guide - Page 9
3. Disconnect your computer and devices from their power sources. Also, disconnect any telephone or telecommunication lines from the computer. Doing so reduces the potential for personal injury or shock. In addition, take note of these safety guidelines when appropriate: When you disconnect a cable,
Dell PowerVault 530F | Rack Installation Guide - Page 10
in front of you as you work. Special shelves are available (from Dell and other sources) to help you correctly position your keyboard. Set the on the monitor screen. Use a chair that provides good lower back support. Keep your forearms horizontal with your wrists in a neutral, comfortable position
Dell PowerVault 530F | Rack Installation Guide - Page 11
1 Monitor screen at or below eye level 2 Wrists relaxed and flat 3 Arms at desk level 4 Feet flat on the floor 5 Monitor and keyboard positioned directly in front of user xiii
Dell PowerVault 530F | Rack Installation Guide - Page 12
xiv
Dell PowerVault 530F | Rack Installation Guide - Page 13
Tools and Supplies 1-3 Installing the Rack Kit 1-3 Removing the Doors From the Rack 1-4 Removing the Doors From the Dell 42-U Rack 1-4 Removing the Doors From the Dell 24-U Rack 1-6 Installing the Slide Assemblies in the Rack 1-8 Installing the System in the Rack 1-11 Installing the
Dell PowerVault 530F | Rack Installation Guide - Page 14
Figure 1-10. Installing the Cable Tray 1-13 Figure 1-11. Installing the Cable-Management Arm 1-14 Figure 1-12. Reversing the Cable-Management Arm 1-16 xvi
Dell PowerVault 530F | Rack Installation Guide - Page 15
this Rack Installation Guide, the following documentation may be required for installing your computer in the rack: Dell PowerVault™ 530F SAN Appliance System Administrator's Guide Dell PowerEdge™ 6450 Systems Installation and Troubleshooting Guide User's Guide support.dell.com Rack Installation
Dell PowerVault 530F | Rack Installation Guide - Page 16
cable-management arm assembly RapidRails slide assemblies (1 pair)* * cable tray 4-U template (1) 6-32 x 0.25-inch hex-head Phillips screws (5) 1-2 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 17
computers, see "Installing the System in the Rack" found later in this guide. The following subsections include instructions for performing the following tasks for both PowerEdge and PowerVault computers: Removing the doors from the rack Installing the slide assemblies in the rack Installing
Dell PowerVault 530F | Rack Installation Guide - Page 18
the push button, rotate the handle clockwise until the latch releases, and then pull the door open. push-button cover push button handle 1-4 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 19
away from the rack. hinge release lever 3. Repeat steps 1 and 2 to remove the back door from the rack, but turn the door handle counter-clockwise. support.dell.com Rack Installation Guide 1-5
Dell PowerVault 530F | Rack Installation Guide - Page 20
1. Unlock and twist the handle clockwise (see Figure 1-4). 2. Open the front door. 1-6 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 21
the opposite side and switch the position of the handle. 4. Replace the rack door (see the section, "Replacing the Rack Doors," found later in this guide). support.dell.com Rack Installation
Dell PowerVault 530F | Rack Installation Guide - Page 22
marked by small indentations in 1-U increments (see Figure 1-6). 1 U (1.75 inches) For more information about requirements for installing components in a Dell rack, see the Dell Rack Advisor software available on the Dell World Wide Web site at: http://support.dell.com. 1-8 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 23
the rack (see Figure 1-8). The hooks on the mounting-bracket flange should align with the marks you made from the V-shaped notches in the template. support.dell.com Rack Installation Guide 1-9
Dell PowerVault 530F | Rack Installation Guide - Page 24
until the mounting hooks engage the square holes in the front vertical rail, allowing the push button to pop out and click. 1-10 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 25
the computer inward on the slide assemblies until the middle (yellow) latch clicks into place, locking the slide to the middle shoulder screw (see Figure 1-9). support.dell.com Rack Installation Guide 1-11
Dell PowerVault 530F | Rack Installation Guide - Page 26
back latch (green) middle latch (yellow) 6. Press up on the green latches and push the chassis into the rack. 7. Tighten the captive thumbscrews on each rack adapter bracket. 8. Install the front bezel, if it was removed. 1-12 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 27
Attach the cable tray to the PowerEdge or PowerVault computer chassis using the five 6-32 x 0.25-inch hex-head Phillips screws (see Figure 1-10). back of into the square mounting holes on the vertical rail and is secured with the captive thumbscrew. support.dell.com Rack Installation Guide 1-13
Dell PowerVault 530F | Rack Installation Guide - Page 28
to the computer. For PowerEdge 6x50 connection details, see your computer's Installation and Troubleshooting Guide and the User's Guide. For PowerVault 530F connection details, see your computer's System Administrator's Guide. 6. Secure the cables to the cable-management arm. 1-14 Rack Installation
Dell PowerVault 530F | Rack Installation Guide - Page 29
: The opposite vertical rail and the slotted pocket on the opposite side of the cable are used for reverse installation of the cable-management arm. support.dell.com Rack Installation Guide 1-15
Dell PowerVault 530F | Rack Installation Guide - Page 30
button cover down over the push button (see Figure 1-2). 4. Repeat steps 1 through 3 to install the back door, but turn the handle clockwise. 1-16 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 31
until it locks in position (see Figure 1-4). 4. Repeat steps 1 through 3 to install the back door. This completes the rack installation for the PowerEdge 6x50 and PowerVault 530F SAN appliance. support.dell.com Rack Installation Guide 1-17
Dell PowerVault 530F | Rack Installation Guide - Page 32
1-18 Rack Installation Guide
Dell PowerVault 530F | Rack Installation Guide - Page 33
installing, 1-14 reversing installation, 1-15 routing cables, 1-15 cautions, v computer installing in rack, 1-12 contents of rack kit, 1-1 support.dell.com Dell Web site, 1-8 doors about, 1-4 opening latch 24-U rack, 1-6 42-U rack, 1-4 about, 1-4 removing 24-U rack, 1-6, 1-7 42-U rack, 1-5 about
Dell PowerVault 530F | Rack Installation Guide - Page 34
illustrated, 1-2 installing, 1-3 list of, 1-1 rack unit, 1-8 RapidRails, 1-1, 1-2 removing the rack doors, 1-4 routing cables, 1-15 Safety, v safety instructions for preventing ESD, xi health considerations, xii slide assemblies installing, 1-10 template about, 1-2, 1-9 using, 1-9 tools recommended

Section	Page
Dell™ PowerEdge™ 6x50 and PowerVault™ 530F SAN Appliance Rack Installation Guide	15
Rack Kit Contents	15
Other Documents You May Need	15
Figure 1-1. Rack Kit Contents	16
Before You Begin	17
Recommended Tools and Supplies	17
Installing the Rack Kit	17
Removing the Doors From the Rack	18
Removing the Doors From the Dell 42-U Rack	18
1. Open the latch on the front door (see Figure 1-2).	18
Figure 1-2. Opening the 42-U Rack Door	18
2. Remove the front door from the rack as shown in Figure 1-3.	19
a. One person should grasp the top of the door to stabilize it. The other person should grasp the...	19
b. The person holding the bottom of the door should press the hinge release lever on the bottom h...	19
c. The person holding the top of the door should press the hinge release lever on the top hinge a...	19
Figure 1-3. Removing the 42-U Rack Doors	19
3. Repeat steps 1 and 2 to remove the back door from the rack, but turn the door handle counter-c...	19
Removing the Doors From the Dell 24-U Rack	20
1. Unlock and twist the handle clockwise (see Figure 1-4).	20
2. Open the front door.	20
Figure 1-4. Unlocking the 24-U Rack Door	20
3. Remove the front door from the rack as shown in Figure 1-5.	21
a. With the door open, lift out and fully retract all hinge pins.	21
b. Once all the hinge pins have been lifted out and retracted, lift the door out.	21
Figure 1-5. Removing the 24-U Rack Doors	21
1. With the door open, lift out and fully retract all hinge pins.	21
2. Remove the hinges and door brackets from the door frame.	21
3. Replace the hinges and door brackets on the opposite side and switch the position of the handle.	21
4. Replace the rack door (see the section, “Replacing the Rack Doors,” found later in this guide).	21
Installing the Slide Assemblies in the Rack	22
Figure 1-6. One Rack Unit	22
1. Place the front of the template on the vertical rails at the front of the rack where you want ...	23
2. Position the bottom of the template where the computer’s lower edge will be located.	23
3. Mark the rack’s front vertical rails with a felt-tip marker or place masking tape where the sy...	23
Figure 1-7. Using Template to Mark Vertical Rails	23
4. At the front of the rack cabinet, position one of the slide assemblies so that its mounting-br...	23
Figure 1-8. Installing the Slide Assemblies	24
5. Align the slide-assembly mounting-bracket flange (on the front of the slide assembly) with the...	24
6. Push the slide assembly forward until the mounting hooks are located in their respective squar...	24
7. At the back of the cabinet, pull back on the mounting-bracket flange until the mounting hooks ...	25
8. Repeat steps 3 through 7 for the remaining slide assembly on the other side of the rack.	25
Installing the System in the Rack	25
1. Pull the two interior slide assemblies out of the rack until they lock in the extended position.	25
2. Lift the computer into position.	25
3. Tilt the front of the computer upward while aligning the back shoulder screws on the sides of ...	25
4. Engage the back shoulder screws in the slot just behind the back (green) latch first, followed...	25
5. Push the computer inward on the slide assemblies until the middle (yellow) latch clicks into p...	25
Figure 1-9. Installing the Computer in the Rack	26
6. Press up on the green latches and push the chassis into the rack.	26
7. Tighten the captive thumbscrews on each rack adapter bracket.	26
8. Install the front bezel, if it was removed.	26
Installing the Cable Tray	27
Figure 1-10. Installing the Cable Tray	27
Installing the Cable-Management Arm	27
1. Facing the back of the rack cabinet, attach the right-angle bracket of the cable- management a...	27
Figure 1-11. Installing the Cable-Management Arm	28
2. Insert the free end of the cable-management arm (the end with the captive thumbscrew) into the...	28
3. Secure the cable-management arm in its slotted pocket with the captive thumbscrew.	28
4. Attach the input/output (I/O) cables to their respective expansion cards on the back of the co...	28
5. Connect the remaining cables to the computer.	28
6. Secure the cables to the cable-management arm.	28
7. After connecting the cables to the computer, unscrew the thumbscrews that secure the front of ...	29
8. Slide the computer forward to the fully extended position.	29
9. Route the cables along the cable-management arm, allowing some additional cable slack at the h...	29
10. Slide the computer in and out of the rack to verify that the cables are routed correctly and...	29
Reversing the Cable-Management Arm Installation	29
1. Turn the cable-management arm over (see Figure 1-12).	29
2. Remove the pull pins from the offset hinge of the cable-management arm.	29
3. Remove the rail-mounting plate.	29
4. Pull the hinge away from the cable-management arm assembly.	29
5. Position the offset hinge next to the cable-management arm assembly.	29
6. Replace the pull pin with the ring facing up.	29
7. Replace the rail-mounting plate in the same orientation to the opposite vertical rail.	29
8. Replace the second pull pin with the ring facing up.	29
9. Perform the steps to install the cable-management arm.	29
Figure 1-12. Reversing the Cable-Management Arm	30
Replacing the Rack Doors	30
Replacing the Rack Doors on a 42-U Rack	30
1. Lift the front door into position and align the hinges with the holes in the rack as shown in ...	30
2. Slide the hinges into the holes in the rack until the hinge release levers lock the hinges int...	30
3. Close the door latch by rotating the handle counterclockwise until it stops, push in the handl...	30
4. Repeat steps 1 through 3 to install the back door, but turn the handle clockwise.	30
Replacing the Rack Doors on a 24-U Rack	31
1. Lift the front door into position and align the hinges with the holes in the rack (see Figure ...	31
2. Line up the door hinges and then press them down.	31
3. Close the door latch by rotating the handle counterclockwise until it stops, and then push the...	31
4. Repeat steps 1 through 3 to install the back door.	31
Index	33
C	33
D	33
E	33
I	33
K	33
M	33
N	33
R	34
S	34
T	34
V	34

Match case Limit results 1 per page

±±±²³´µµ²¶·¸

¹º»»·¼½²³´µµ²¶·¸

±²³³´µ¶·¸²¹º»¼²´µ½

¾¿µÀÁ»

¶·¸²¹ÂÀÃ³Ä´µ¾Å¿ÆµÇÈÉµÈÊÊ³ËÀÁÌ²

±²³´µ¶·¸¹²ºº²¹¶»·µ¼½¶¾¿