Dell PowerVault 56F Dell PowerVault Switch Manager User's Guide - Page 26
portDisable, Domain ID, Principal, Subordinate, Disabled, State, Online, Offline, Testing, Faulty,
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
LED status indicator icon WWN field Domain ID field Role field State field Firmware field Ether IP field Ether NM field FC IP field FC NM field Gateway field No light - No device attached Steady yellow - Receiving light, but not online; (check cable connections) Slow yellow - Disabled (diagnostics or portDisable command) Fast yellow - Error, fault with port Steady green - Online (connected with a device by cable) Slow green - Online but segmented (loopback cable or incompatible switch) Fast green - Internal loopback (diagnostic) Flickering green - Online and transmitting and receiving frames Unique permanent numeric identifier for each switch; assigned by the manufacturer. Number that uniquely identifies the switch in a fabric Principal - Principal switch as defined in FC_SW protocol Subordinate - Switch enabled, but not as the principal switch Disabled - Switch disabled Switch state: Online Offline Testing Faulty Firmware version Ethernet IP address Ethernet netmask value Fibre Channel IP address Fibre Channel netmask value IP address of the default gateway; must be properly set to access the switch from other networks 2-16 Dell PowerVault Switch Manager User's Guide