Dell PowerVault NX3500 User Manual - Page 12
Connecting the Power Cable(s), Connect the system's power cables to the system.
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the Power Cable(s) Connect the system's power cable(s) to the system. CAUTION: Both the 120 V (LV) and the 230 V (HV) power modules provide IEC 320 C-13 output receptacles. Only use a power cord rated for the input power source rating labeled next to the input connector on the power module back panel. CAUTION: You must always verify the voltage rating of the BPS. Connecting a 230 Vac into a 120 V BPS will damage the BPS. Open the spring-loaded interlock cover for the input connector and connect the power cable to the BPS. 10 Getting Started With Your System
10
Getting Started With Your System
Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system.
CAUTION:
Both the 120 V (LV) and the 230 V (HV) power modules provide IEC 320
C-13 output receptacles. Only use a power cord rated for the input power source
rating labeled next to the input connector on the power module back panel.
CAUTION:
You must always verify the voltage rating of the BPS. Connecting a 230
Vac into a 120 V BPS will damage the BPS.
Open the spring-loaded interlock cover for the input connector and connect the
power cable to the BPS.