Dell PowerVault NX3610 Owner's Manual - Page 8
NIC Indicator Codes, Serial COM port mini USB
View all Dell PowerVault NX3610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Item Indicator, Button, or Icon Connector 14 Service action button 15 Video connector 16 USB connectors (2) 17 Serial COM port (mini USB connector) 18 PSU indicator NIC Indicator Codes Description Used to troubleshoot certain errors. This button can be pressed using the end of a paper clip. NOTE: You must press and hold the button for ten seconds to generate an SCI interrupt. NOTE: Use this button only if directed to do so by qualified support personnel. Allows you to connect a VGA display to the system. Allows you to connect USB devices to the system. The ports are USB 2.0-compliant. Allows you to connect a serial device to the system. NOTE: This connector is for service only. Connect to this connector only if asked to do so by Dell support. Indicates whether power is present or whether a power fault has occurred. Figure 4. NIC Indicator 1. link indicator 2. activity indicator Indicator Indicator Code Link and activity indicators are off The NIC is not connected to the network. Link indicator is green The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10 Gbps). Link indicator is amber The NIC is connected to a valid network at less than its maximum port speed. Activity indicator is blinking green Network data is being sent or received. 8