Dell Precision M20 Dell Precision M20 Service Manual - Page 29
Palm Rest
View all Dell Precision M20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Back to Contents Page Palm Rest Dell Precision™ M20 Service Manual Removing the Palm Rest Installing the Palm Rest CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. Removing the Palm Rest 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the center control cover. 3. Remove the keyboard. 4. Remove the display assembly. 5. Remove the two M2.5 x 5-mm screws from the top of the palm rest. 6. Disconnect the touch pad cable from the connector on the system board. 1 touch pad connector 2 screws (2) at top of palm rest 3 palm rest 4 computer base 7. Turn the computer over and remove the thirteen M2.5 x 8-mm screws.