Denon 488BA Owners Manual - English - Page 50
Symptom, Cause, Countermeasure, Audio, Video, XM Satellite Radio
UPC - 883795000086
View all Denon 488BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Getting Started Connections Setup Playback Remote Control Information Troubleshooting ENGLISH GAudioH Symptom No sound is produced from center speaker. No sound is produced from surround speakers. No sound is produced from subwoofer. No test tones are produced when remote control unit's TEST button is pressed. DTS sound is not output. HDMI audio signals are not output from speakers. No sound is output from the monitor connected with HDMI connections. Cause Countermeasure • You are playing a monaural • The mode is set to something source (TV, AM radio broadcast, other than "STANDARD" (Dolby/ etc.) in the "STANDARD" (Dolby/ DTS Surround). DTS Surround) mode. • The surround mode is set to • Set to a surround playback "STEREO" or "DIRECT". mode. • Subwoofer's power not turned • Turn on the subwoofer's power. on. • The "Subwoofer" setting at • Set to "Yes". "Speaker Setup" is set to "No". • The subwoofer is not properly connected. • Check the connections. • The subwoofer's volume is turned off. • Adjust the subwoofer's volume to an appropriate level. • Surround mode not set to • Set to the "STANDARD" (Dolby/ "STANDARD" (Dolby/DTS DTS Surround) mode. Surround)" • DVD player's audio output setting • Set the DVD player. For details, is not set to bitstream. refer to the DVD player's operating instructions. • DVD player is not compatible • Use a DTS-compatible player. with DTS sound playback. • The AVR-488's "Input Mode" • Set to the "Auto" or "DTS" setting is set to other than mode. "DTS". • The audio signal input to the HDMI input connector cannot be - played on the AVR-488. Input the audio signal to the digital audio input connector or analog audio input connector. • HDMI input setting is improper. • Check the HDMI input setting. Page 25 25 - 20 9 35 25 - - 29 10 22 GVideoH Symptom No picture appears. No picture appears with HDMI connections. DVDs cannot be copied on a VCR. Cause Countermeasure • The connections between the • Check the connections. AVR-488 and monitor are faulty. • The monitor's input setting is • Set properly. wrong. • The player is connected using the • High definition (1080i/720p) and component input connectors, the progressive (480p/576p) video monitor is connected using the signals are not down-converted. video (yellow) or S-Video output Set the player to interlace connectors. (480i/576i) signals. • The connections to the HDMI • Check the connections. connectors are faulty. • HDMI input setting is improper. • Check the HDMI input setting. • The HDMI format of the player • Match the HDMI format of the and monitor do not match. player and monitor. • This is not a malfunction. Most - movie software includes copy prevention signals and cannot be copied. Page 10 ~ 17 - - 10 22 10 - GiPodH Symptom iPod cannot be played. Cause Countermeasure • The input source assigned to • Switch to the input source Control Dock for iPod is not assigned at Control Dock for selected. iPod. • Cable is not properly connected. • Reconnect. • Control Dock for iPod's AC • Plug the Control Dock for iPod's adapter is not connected to AC adapter into a power outlet. power outlet. GXM Satellite RadioH Symptom "CHECK ANTENNA" is displayed in the XM mode. "NO SIGNAL" is displayed in the XM mode. "OFF AIR" is displayed in the XM mode. Receiving only XM channels 0 and 1. Cause Countermeasure • AVR-488's XM connector and the • Check that the connections are XM Mini-Tuner and Home Dock correct. is not properly connected. • The signal cannot be received. • Reposition your XM Mini-Tuner and Home Dock antenna. • The selected channel is not • Select another channel. currently broadcasting. • The XM Tuner is not activated. • Contact XM Radio. Page 22 12 - Page 15 32 32, 33 32 47