Denon AVR 2807 Serial Protocol - Page 15

EVENT PARAMETER function MU ON OUTPUT MUTE ON/OFF change OFF ZM ON MAIN-ZONE ON/OFF change OFF Z2 PHONO MULTI ZONE-2 source change | ---The name of PARAMETER is V.AUX the same as that of the time of SI COMMAND. SOURCE MULTI ZONE-2 mode cancel ** MULTI ZONE-2 VOLUME change , **:10 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 99 = ---(MIN) (Power Amp Assign=ZONE2 Only) ON MULTI ZONE-2 ON/OFF change OFF Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change OFF Z3 PHONO MULTI ZONE-3 source change | ---The name of PARAMETER is V.AUX the same as that of the time of SI COMMAND. SOURCE MULTI ZONE-3 mode cancel ** MULTI ZONE-3 VOLUME change , **:10 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 99 = ---(MIN) ON MULTI ZONE-3 ON/OFF change OFF Z3MU ON ZONE3 OUTPUT MUTE ON/OFF change OFF The '*' PARAMETER of Z2, Z3 EVENT : Uses two ASCII characters. (see page4 J) section) example MUON MUOFF ZMON ZMOFF Z2PHONO | Z2V.AUX Z2SOURCE Z280 Z2ON Z2OFF Z2MUON Z2MUOFF Z3PHONO | Z3V.AUX Z3SOURCE Z380 Z3ON Z3OFF Z3MUON Z3MUOFF - 15 -