Denon AVR-5805MK2 Firmware Update Instructions - Page 8
Network-related settings Network Setup
UPC - 081757507400
View all Denon AVR-5805MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic Operation Network-related settings (Network Setup) Basic Operation If you are using a broadband router (DHCP function), there is no need to make the settings at "System Setup Menu" - *"7.Option Setup" - "7.Network Setup", since the DHCP function is set to "ON" in the AVR-5805/4806's default settings. If the AVR-5805/4806 is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. *AVR-5805 only 2 DHCP (Dynamic Host Configuration Protocol) and Auto IP These are systems by which the IP address and other network settings are automatically set for the AVR5805/4806, computer, broadband router and network devices. 2 DNS (Domain Name System) This is a system for converting the domain names used when browsing Internet sites (for example, "www.jp") into the IP addresses actually used for communications (for example, "202.221.192.106"). 5.Primary DNS / Secondary DNS Set the IP address within the ranges shown below. If there is only one DNS address indicated in the documentation supplied by your provider, input it at "e. 1st". If there are two or more DNS addresses, input the first one at "f. 2nd". Setting the Proxy Make this setting when connecting to the Internet via a proxy server. • Once the settings are completed, press the ENTER button three times to quit the "System Setup Menu". Standby Mode Power Saving When not using the AVR-5805/4806 connected in a network, set "ON" to reduce the power consumption when in the standby mode. Set "OFF" when using the AVR-5805/4806 connected in a network. PC Language Select according to the language of the computer being used. The languages are indicated with three letters conforming to ISO639-2. Setting the IP Address 1.DHCP Settings Set whether or not to make the DHCP settings automatically. ON (default settings): The DHCP function is enabled. OFF: The DHCP function is disabled. 2.IP Address Set the IP address within the ranges shown below. The Net Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255 CLASS B: 172.16.0.0 ~ 172.31.255.255 CLASS C: 192.168.0.0 ~ 192.168.255.255 3.Subnet Mask When connecting an xDSL modem or terminal adapter directly to the AVR-5805/4806, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. 4.Gateway Set the IP address within the ranges shown below. When connected to a gateway (router), input its IP address. 1.Proxy: In some cases it is necessary to pass through a proxy server to connect to the Internet. ON: The proxy server is enabled. OFF (default settings): The proxy server is disabled. 2.Proxy Address/Name Input the proxy server domain name or address. If "ON" has been set at the "Proxy" setting, the character input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the character, then press the ENTER button. Once all the characters have been input, the character input mode is canceled. 3.Port Input the proxy server port number. If "ON" has been set at the "Proxy" setting, the number input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the number, then press the ENTER button. Once all the numbers have been input, the number input mode is canceled. 8