Denon AVR 888 Owners Manual - English - Page 32

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting ENGLISH Front Select front speaker size. [Selectable items] Large Small : S elect front speaker size. Subwoofer Select subwoofer use. [Selectable items] d Dolby Digital Setup Set dynamic range for downmix playback of Dolby Digital sources. [Selectable items] ON : Compression is used. Select this if sound from front speakers is distorted. OFF : Do not use compression. This is the recommended setting. g Manual EQ Adjust tonal quality for each speaker using graphic equalizer. Base Curve Copy Copy the Room EQ´s "Audyssey Flat" correction curve. [Selectable items] Yes No Yes No : S elect subwoofer use. Subwoofer Mode Select low range signal to be reproduced by subwoofer. [Selectable items] LFE LFE+Main : S elect subwoofer signal. Crossover Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Select crossover frequency. • Set this to "ON" if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. "Base Curve Copy" is displayed after the auto setup procedure has been performed. Adjust CH Select speaker adjustment method. [Selectable items] Each CH : A djust tonal quality for each speaker separately. L/R CH : A djust tonal quality for each L/R speaker pair. ALL CH : A djust tonal quality for all speakers together. Manual EQ Select the speaker and frequency band and adjust the level. [Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz Distance FL Set distance from listening position to front left speaker. [Variable range] 0.0ft ~ 60.0ft Distance FR Set distance from listening position to front right speaker. [Variable range] 0.0ft ~ 60.0ft • The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below. q Analog and PCM 2-channel signals w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.) • When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed. [Variable range] 2kHz 4kHz 8kHz -20dB ~ +6dB Default Resets the settings to the default values. 16kHz 29