Denon DHT590BA Owners Manual - English - Page 61

Specifications n Audio section • Power amplifier Rated output: Front : 75 W+75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 75 W+75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 110 W+110 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Output connectors: Front, Center, Surround : 6～16 Ω/ohms • Analog Input sensitivity / Input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz - +1, -3 dB (DIRECT mode) S/N: 98 dB (IHF-A weighted, DIRECT mode) n Video section • Standard video connectors Input / output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +1, -3 dB • Color component video connector Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB / CB signal - 0.7 Vp-p, 75 Ω/ohms PR / CR signal - 0.7 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 60 MHz - +0, -3 dB n Tuner section [FM] [AM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.2 µV (12.8 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 2.8 µV (20.2 dBf) STEREO 48.7 µV (45.0 dBf) S/N (IHF-A): MONO 70 dB STEREO 67 dB Total harmonic Distortion (at 1 kHz): MONO 0.7 % STEREO 1.0 % n General Power supply: AC 120 V, 60 Hz Power consumption: 4.3 A 0.3 W (Standby) Maximum external dimensions: 434 (W) x 171 (H) x 377 (D) mm (17-3/32" x 6-47/64" x 14-27/32") Weight: 9.3 kg (20 lbs 8 oz) n Remote control unit (RC-1120) Batteries: R03/AAA Type (two batteries) Maximum external dimensions: 50 (W) x 211 (H) x 22 (D) mm (1-31/32" x 8-5/16" x 55/64") Weight: 110 g (Approx 3.9 oz) (including batteries) z For purposes of improvement, specifications and design are subject to change without notice. ENGLISH 58 Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications