Home » Denon Manuals » Audio Mixers » Denon DN-X1100 » Manual Viewer

Denon DN-X1100 Owners Manual

Denon DN-X1100 - DJ Mixer Manual

UPC - 883795000840

View all Denon DN-X1100 manuals

Add to My Manuals
Save this manual to your list of manuals

Denon DN-X1100 manual content summary:

Denon DN-X1100 | Owners Manual - Page 1
DJ MIXER / DJ-MIXER / MELANGEUR DJ / DJ MIXER / DJ MIXER / DJ MIXER / DJ MIXER / DJ 混音台 DN-X1100 Owner's Manual Bedienungsanleitung Manuel de l'Utilisateur Manuale delle istruzioni Manual del usuario Gebruiksaanwijzing Bruksanvisning
Denon DN-X1100 | Owners Manual - Page 2
If problems occur, contact your DENON dealer. 3. Do not place anything inside Do not place metal objects or spill liquid inside the DJ mixer. Electric shock or malfunction may result. Please, record and retain the Model name and serial number of your set shown on the rating label. Model No. DN-X1100
Denon DN-X1100 | Owners Manual - Page 3
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L'UTILISATION / NOTE SULL'USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN • Avoid high temperatures. Allow for sufficient heat dispersion
Denon DN-X1100 | Owners Manual - Page 4
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA A NOTE ABOUT RECYCLING: This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or
Denon DN-X1100 | Owners Manual - Page 5
mm CONGRATULATIONS! You have purchased the DENON DN-X1100 DJ mixer from D&M HOLDINGS lnc. 1. Input Select (Matrix input select) 8 input sources are freely assignable to each channel. 2. 60 MM Channel Fader (Replaceable) 60 mm long-stroke channel fader for precise adjustment of the volume. 3. Level
Denon DN-X1100 | Owners Manual - Page 6
. • The DUCKING attenuation level adjusts. See Q3 Source input fader (Ch. fader) W2 below rear panel o (vpage 4). u SPLIT CUE meter indicates the A, B: The channel source is assigned to A or B of the Crossfader. THRU: Select when you don't assign the channel source into the Crossfader. stereo
Denon DN-X1100 | Owners Manual - Page 7
effects. Q6 CH FADER CONTOUR control Adjusts the volume curve response of the channel fader. Q7 CH FADER START switch This function will start the performance of CD player with Ch. Fader automatically is on/off. FADER START If the separately sold DN-S1200, DN-S3500, DN lit, the DN-X1100 is ready to
Denon DN-X1100 | Owners Manual - Page 8
Getting Started Connections Fader Start Specifications ENGLISH Rear Panel Power cord U.S.A. and Canada models: To power outlet (AC 120 V, effect processor, use Lch input and output. i LINE 2, 4, 6, 8 FADER output terminals Connect these terminals to the Fader input terminals of the DN-S1200, DN
Denon DN-X1100 | Owners Manual - Page 9
effects into the stereo Effect, if used. Connect your Microphone(s) and monitor headphones. Make sure all faders are at "zero" and the unit is off. Take care to connect only one cable at a time. pay attention to L and R position of terminals, on both the DN-X1100 , then your mixer, and then
Denon DN-X1100 | Owners Manual - Page 10
players are connected to LINE2, 4, 6 or 8, they can be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected. DN-S3500 DN-X1100 DN-S3500 '"%&3 -*/& R L 065 RL RL '"%&3 -*/&f -*/&s '"%&3 -*/& '"%&3 -*/& RL -*/& 065
Denon DN-X1100 | Owners Manual - Page 11
the source input fader (Ch. Fader) of CH-1, CH2, CH-3 or CH-4 control all the way to the bottom. 4 Set the standby mode on CD player. 5 Use the CH FADER CONTOUR control to control the channel fader startup curve. 6 When you want to start the player, move up the source input fader (Ch. Fader) and the
Denon DN-X1100 | Owners Manual - Page 12
Start Specifications ENGLISH Replacing the Channel Fader The Channel fader may be removed without any disassembly of the DN-X1100 itself. 1 Pull out the Channel fader knob. 2 Remove the five outer screws attaching the channel fader plate and channel fader bracket assembly from the front panel
Denon DN-X1100 | Owners Manual - Page 13
dimensions: Installation: Weight: Power supply: Power consumption: Environmental conditions: 320 (W) x 357 (D) x 91 (H) mm Table-Top 6.2 kg AC 120 V, 60 Hz (U.S.A. and Canada Effect • Cross talk: • Channel equalizer: Hi: Mid: Low Fader Start Specifications
Denon DN-X1100 | Owners Manual - Page 14
TOKYO, JAPAN www.denon.com Professional Business Company, D&M Holdings Inc. Printed in China 5411 10309 105P