Denon DN-X120 Owners Manual - Page 7
Rear Panel, Front panel - power cord
View all Denon DN-X120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Connections Playback Specifications Rear Panel Q7 Q8 Front panel Q9 ENGLISH W6 W5 W4 W3W2 W1 W4W3W2 W1 W0 W7 W7 W8 W8 W9 Q7 Power operation switch (POWER) Selects power "ON" or "OFF". NOTE: Whenever the power switch is in the OFF state, the AC adaptor is still connected on AC line voltage. Please be sure to unplug the cord when you don't use for along time. Q8 Balanced MASTER OUT jacks (BAL.) • These 1/4" TRS jacks provide a balanced line level output. • Connect these jacks to the balanced analog input jacks on an amplifier or console. • Pin layout: Tip=Hot Ring=Cold Sleeve=GN Q9 MIC BALANCED INPUT jack • Accepts an balanced microphone with 1/4" TRS mono jacks. • Pin layout: Tip=Hot Ring=Cold Sleeve=GND W0 PGM1, 2 FADER output jacks Connect these jacks to the FADER input jacks of DN-S3500, DN-S1200 and etc. using the 3.5mm stereo mini cord. W1 Phono ground screw (GND) • This screws provide a place to connect the ground wire from a turntable. • This terminal is exclusively for a turntable ground and not a safety earth ground. W2 PHONO1, 2 / LINE1, 3 switches (LN / PH) • These switches change the input from PHONO to a LINE level input. • These switches set a LINE level input when turntable is not connected. NOTE: Always be sure main power is shut off before change the position of the Line Level Selector Switch. W3 PHONO1, 2 / LINE1, 3 input jacks These stereo pair of unbalanced RCA jacks are inputs for a PHONO (RIAA) stage for magnetic (MM) cartridges or a LINE stage suitable for any device, such as a CD player. W4 LINE2, 4 input jacks These stereo pair of unbalanced RCA jacks are inputs for any line level device. W5 Unbalanced MASTER OUT jacks • This stereo pair of RCA jacks provides an unbalanced line level output. • Connect these jacks to the unbalanced analog input jacks on an amplifier or console. W6 AC IN Input connection for the included AC adaptor. NOTE: Use specified attached AC adaptor only. W7 CH 1/2 FADER START switches Use this to switch the Channel Fader Start function ON and OFF. W8 CROSSFADER START A, B switches Use this to switch the Crossader Start function ON and OFF. W9 CROSSFADER REVERSE switch Reverses the direction of the crossfader. E0 CROSSFADER CONTOUR adjustment Adjusts the shape of the crossfader curve from a fast cut for scratching or to a slow fade for mixing. E1 HEADPHONE output jack Accept 1/4" stereo headphone plugs. E0 E1 1.DN-X120_ENG.indd 7 2007/12/28 18:07:06