Denon DVD 555S Owners Manual - Page 22

PLAYING A DISC Changing the On-Screen Display Virtual Surround DVD-V You can check information about the current disc by pressing the DISPLAY button on the remote control. 1 Press the DISPLAY button dur- ing playback to show the cur- 9/49 0:00:00 -0:03:30 rent chapter. • The elapsed and remaining playing time of the current chapter will be displayed. 2 Press the DISPLAY button to show the current title. • The elapsed and remaining playing time of the current title will be displayed. 3 Press the DISPLAY button to show the BIT RATE and the current repeat setting. IIIIIII T L1 • If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing). 4 Press the DISPLAY button to remove the display. DVD-V CD MP3 WMA You can enjoy surround-sound effect with two speakers. 1 During playback, press the MODE button repeatedly until OFF the Virtual Surround setting appears. 2 Press the ENTER button to set it 1(Natural effect), 2(Emphasised effect) or OFF. 3 Press the RETURN button to exit. NOTES: • Select Virtual Surround OFF or adjust the volume down if the sound is distorted. • Virtual Surround will not be effective if the sound mode is set to something other than "STEREO". (for Audio CD play only) • This function cannot be used during Dialog Speed. Black Level Setting CD DVD-V 1 Press the DISPLAY button during playback, the current track will be displayed on the TV screen. • The elapsed and remaining playing time of the current track will be displayed. 2 Press the DISPLAY button to show the total tracks. • The elapsed and remaining playing time of the disc will be displayed. 3 Press the DISPLAY button to remove the display. Hints for the On-Screen Display • C - indicates Chapter repeat • T - indicates Title or Track repeat • A - indicates Disc repeat • A B - indicates A-B repeat Adjust the Black Level Setting to make the black parts of the picture as bright as you prefer. 1 During playback, press the MODE button repeatedly until ON Black Level setting appears. 2 Press the ENTER button to switch ON/OFF. ON (Default) : Makes the dark parts brighter. OFF : Shows the original picture as recorded. 3 Press the RETURN button to exit. NOTE: This function cannot be used during Dialog Speed. (Refer to page 22.) Dialog Speed DVD-V Marker Setup Screen Available only on discs recorded in the Dolby Digital format. Dialog Speed plays back in slightly faster or slower speed DVD-V CD while keeping the sound quality as in the normal playback. Use markers to memorize your favorite places on a disc. 1 Press the SEARCH MODE button repeatedly until the display screen and Markers 1 2 3 4 5 6 7 8 9 10 AC -- --:--:-- appear during playback. 2 Press the Cursor buttons ( s or B ) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that appears in the display. 1 During playback, press the MODE button repeatedly until the OFF Dialog Speed setting appears. • "OFF" appears on the TV screen. 2 Press the ENTER button or the Cursor button ( s or B ) to switch among (x1.3), (x0.8) and OFF. : Plays back approximately at 0.8 times of normal playback. 3 When the disc reaches the point you want to remember, press the ENTER button. • The Title or Track and elapsed playing time will appear : Plays back approximately at 1.3 times of normal play back. 3 To return to normal playback, press the PLAY but- in the TV screen. ton. 4 To return to the Marker later, press the SEARCH NOTES: MODE button repeatedly during playback and the • Every time you press the STOP button, the setting will s or B button to choose the desired marker, then press the ENTER button. be turned OFF. • Subtitle can be viewed during this function. • Picture Control, Black Level and Audio (language) set- NOTES: ting cannot be changed while using this mode. • Opening the disc tray or turning off the power or select AC at step 2 and press the ENTER button will erase • Virtual Surround does not function while using this mode. • This feature may not work at some point on a disc. all Markers. • When using digital audio connection (COAXIAL or • To clear a marker, using the s or B button, position OPTICAL), the LPCM sound will be output. the cursor on to the marker number to be cleared and • When using the Dialog Speed function with 5.1 channel press the CLEAR button. digital outputting, the analog output sound will be fixed • You can mark up to 10 points. at 2 channel. 5 Press the SEARCH MODE or RETURN button to exit. - 22 - • When using digital audio connection, only the Dolby Digital sound will be available. EN