Dewalt D24001 Instruction Manual - Page 1
Dewalt D24001 Manual
View all Dewalt D24001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
FIG. 1 FIG. 2 FIG. 3 Heavy Duty Tile Saw Stand D24001 This Tile Saw Stand is designed for use with the D24000 Wet Tile Saw. Do not use this saw stand with any other tool. WARNING: For your own safety, read the tool instruction manual before using any accessory. Failure to heed these warnings may result in personal injury and serious damage to the tool and the accessory. When servicing this tool, use only identical replacement parts. READ INSTRUCTIONS BEFORE USE WARNING: • Read tool and stand instruction manuals before use. • For use with D24000 Wet Tile Saw. • Open stand fully before use. • Maximum load: 300lbs. (136kg) • Do not climb, sit or stand on saw stand. • Do not use stand on uneven or unstable surface. • Assemble stand as shown in Figure 1. TO ADJUST TILE SAW STAND 1. The leg extensions each have a series of holes to allow multiple stand heights. 2. Adjust the height of the stand then use fasteners to secure leg extensions. Ensure that each extension is adjusted to the same height. TO USE TILE SAW STAND 1. Unfold the saw stand until it is fully opened. Place it upright, as shown in Figure 2. 2. Place the Wet Tile Saw pan on the stand. The rear feet on the pan have two semi-circular reliefs; place these over the rear rail as shown in Figure 3. The front rail should rest behind the front feet on the pan. TO CLOSE TILE SAW STAND 1. Remove the Wet Tile Saw from the stand. 2. Pick the stand up by the top rails and fold in to close. REAR PAN FEET PIEDS ARRIÈRES DU PLATEAU PARTE INFERIOR TRASERA DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (AUG04) Form No. 627026-00 D24001 Copyright © 2004 DEWALT