Dewalt DCE531M1 Instruction Manual - Page 10

English COMPONENTS (FIG. A) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. Refer to Figure A at the beginning of this manual for a complete list of components. Intended Use This cordless pencil vibrator is designed for professional vibration applications. DO NOT use under wet conditions or in the presence of flammable liquids, gases, or dusts. This cordless pencil vibrator is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Attaching the Shaft (D, E) 1. Ensure that the plastic collar 7 is inserted over the flex shaft casing 6 as shown in Figure D. 2. Insert the spindle 9 into the flex shaft opening. 3. Manuevre the flex shaft back and forth until the parts slide together (Fig. E). 4. Ensure that the flex shaft flange 10 is snug against housing 3 . 5. Firmly tighten the collar by hand (Fig. E). Do not use a wrench to tighten. Fig. D 6 7 OPERATION WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Installing and Removing the Battery Pack (Fig. F) NOTE: For best results, make sure your battery pack is fully charged. Fig. F 9 8 To install the battery pack 8 into the tool handle, align the battery pack with the rails inside the tool's handle and slide it into the handle until the battery pack is firmly seated in the tool and ensure that it does not disengage. To remove the battery pack from the tool, press the release button 9 and firmly pull the battery pack out of the tool handle. Insert it into the charger as described in the charger section of this manual. Proper Hand Position (Fig. G) WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown. WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Proper hand position requires one hand on the main handle and one hand on the main housing for stability. Fig. G 3 Fig. E 9 10 Trigger Switch (Fig. A) To turn the tool "ON", squeeze the trigger switch 1 . To turn the tool "OFF" release the trigger switch. Lock-Off Button (Fig. H) To select Locked/Off, depress the lock-off button 2 on the left side of the tool. When changing the position of the lockoff button, be sure the trigger is released. 8