Dewalt DWD216G Instruction Manual

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA.

ADVERTENCIA:

LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

DWD210G, DWD215G, DWD216G, DWD220

Heavy-Duty 1/2" (13 mm) Drill

Perceuse industrielle 13 mm (1/2 po)

Taladro industrial de 13 mm (1/2 pulg.)

Deﬁnitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual

and pay attention to these symbols.

DANGER:

Indicates an imminently hazardous situation which, if not avoided,

will

result in

death or serious injury

.

WARNING:

Indicates a potentially hazardous situation which, if not avoided,

could

result in

death or serious injury

.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided,

may

result in

minor or moderate injury

.

NOTICE:

indicates a practice

not related to personal injury

which, if not avoided,

may

result in

property damage

.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL, CALL

US TOLL FREE AT:

1-800-4-D

E

WALT (1-800-433-9258)

WARNING:

To reduce the risk of injury, read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions.

Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a)

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b)

Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or

fumes.

c)

Keep children and bystanders away while operating a power tool.

Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

a)

Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and

matching outlets will reduce risk of electric shock.

b)

Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

c)

Do not expose power tools to rain or wet conditions.

Water entering a power tool will

increase the risk of electric shock.

d)

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged

or entangled cords increase the risk of electric shock.

e)

When operating a power tool outdoors, use an extension cord suitable for outdoor

use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)

If operating a power tool in a damp location is unavoidable, use a ground fault

circuit interrupter (GFCI) protected supply.

Use of a GFCI reduces the risk of electric

shock.

3) PERSONAL SAFETY

a)

Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication.

A moment of inattention while operating power tools may

result in serious personal injury.

b)

Use personal protective equipment. Always wear eye protection.

Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c)

Prevent unintentional starting. Ensure the switch is in the off position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energizing power tools that have the

switch on invites accidents.

d)

Remove any adjusting key or wrench before turning the power tool on.

A wrench or

a key left attached to a rotating part of the power tool may result in personal injury.

e)

Do not overreach. Keep proper footing and balance at all times.

This enables better

control of the power tool in unexpected situations.

f)

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught in

moving parts.

g)

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used.

Use of dust collection can

reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a)

Do not force the power tool. Use the correct power tool for your application.

The

correct power tool will do the job better and safer at the rate for which it was designed.

b)

Do not use the power tool if the switch does not turn it on and off.

Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c)

Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e)

Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are caused by

poorly maintained power tools.

f)

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g)

Use the power tool, accessories and tool bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed.

Use of the power tool for operations different from those intended could result

in a hazardous situation.

5) SERVICE

a)

Have your power tool serviced by a qualified repair person using only identical

replacement parts.

This will ensure that the safety of the power tool is maintained.

Additional Safety Rules

•

Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces, when performing an operation

where the cutting accessory may contact hidden wiring or its own cord.

Cutting

accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

•

Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

• ALWAYS

use the side handle supplied with the tool. Tighten the side handle securely before

use. Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it

with both hands. Operating this tool with one hand will result in loss of control. Breaking through

may be hazardous as well.

• Use clamps or other practical way to secure and support the workpiece to a stable

platform.

Holding the work by hand or against your body is unstable and may lead to loss of

control.

•

Keep handles dry, clean, free from oil and grease.

It is recommended to use rubber gloves.

This will enable better control.

•

Air vents often cover moving parts and should be avoided.

Loose clothes, jewellery or

long hair can be caught in moving parts.

•

An extension cord must have adequate wire size (AWG or American Wire Gauge) for

safety.

The smaller the gauge number of the wire, the greater the capacity of the cable, that is

16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating. When using more than one extension to make up

the total length, be sure each individual extension contains at least the minimum wire size. The

following table shows the correct size to use depending on cord length and nameplate ampere

rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the

cord.

Minimum Gauge for Cord Sets

Ampere Rating

Volts

Total Length of Cord in Feet (meters)

120V

25 (7.6)

50 (15.2)

100 (30.5)

150 (45.7)

240V

50 (15.2)

100 (30.5)

200 (61.0)

300 (91.4)

More

Than

Not More

Than

AWG

0

6

18

16

16

14

6

10

18

16

14

12

10

12

16

16

14

12

12

16

14

12

Not Recommended

WARNING: ALWAYS

use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use

face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratory protection.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

•

crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,

and other construction activities. Wear protective clothing and wash exposed areas

with soap and water.

Allowing dust to get into your mouth, eyes, or lay on the skin may

promote absorption of harmful chemicals.

WARNING:

Use of this tool can generate and/or disperse dust, which may cause serious and

permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection

appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hearing protection that conforms to ANSI

S12.6 (S3.19) during use.

Under some conditions and duration of use, noise from this product

may contribute to hearing loss.

•

The label on your tool may include the following symbols. The symbols and their definitions are

as follows:

V

..................

volts

A

...................

amperes

Hz

................

hertz

W

..................

watts

min

..............

minutes

................

alternating current

...........

direct current

................

alternating or direct current

................

Class I Construction

n

o

.................

no load speed

....................

....................

(grounded)

n

...................

rated speed

................

Class II Construction

..................

earthing terminal

....................

(double insulated)

..................

safety alert symbol

…/min

.........

per minute

BPM

..............

beats per minute

IPM

..............

impacts per minute

RPM

..............

revolutions per minute

SPM

............

strokes per minute

sfpm

..............

surface feet per minute

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D

E

WALT • www.dewalt.com

D

E

WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286

(APR12)

Part No. N179102

DWD210G, DWD215G, DWD216G, DWD220

Copyright © 2008, 2010, 2012 D

E

WALT

The following are trademarks for one or more D

E

WALT power tools: the yellow and black color scheme, the “D” shaped air

intake grill, the array of pyramids on the handgrip, the kit box configuration, and the array of lozenge-shaped humps on the

surface of the tool.

Dewalt DWD216G Instruction Manual

Dewalt DWD216G Manual

Dewalt DWD216G manual content summary: