Dewalt DWE43244N Instruction Manual - Silicone Sealant Safety Data Sheet - Page 3

5. FIRE-FIGHTING MEASURES FLAMMABLE PROPERTIES Firefighting procedures: Remove sources of combustibles. Extinguish the fire using fire-fighting extinguishing media listed below. Cool surrounding area (e.g., tanks, buildings) by spraying water to prevent fire extension. Extinguished media: Carbon dioxide, powder or foam. Fire & explosion hazards: Dense smoke emitted when burned without sufficient oxygen. Firefighting equipment: Wear positive pressure self-contained breathing apparatus in any closed space. 6. ACCIDENTAL RELEASE MEASURES Remove sources of ignition, wear proper protective equipment when in work. Keep people away from dangerous area, and evacuate people on the leeward. Wipe up or scrape up with proper materials, such as cloth, sand, or other absorbents. Dispose of saturated absorbent or cleaning materials properly. Thoroughly clean the area with solvents or detergents to avoid slip hazard. Avoid release to the environment. 7. Handling: Storage: HANDLING AND STORAGE Remove sources of ignition. This material releases alcoholic gas during curing. Use with adequate ventilation. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Avoid breathing dust/fume/gas/mist/vapors/spray. Keep away from water and moisture. Store within a room temperature environment in a cool dry place. Keep container closed. Keep away from oxidizing materials, moisture, and water. Store locked up. 8. EXPOSE CONTROLS / PERSONAL PROTECTION Eye protection: Wear protective goggles. Skin protection: Wear chemical resistant gloves and work clothes. - 3 -