Dewalt DWE46100 Instruction Manual - Page 9
Dust Extraction Fig. 1, 5 - dealers
View all Dewalt DWE46100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 5. Place the wheel onto the work surface and move the grinder from right to left to cut around the inside corner for best dust collection. 6. Remove the tool from work surface before turning tool off. Allow the tool to stop rotating before laying it down. 7. Close the corner door and lock in place using the cornering door locking lever (E). FIG. 4 F F E NOTE: The amount of dust retained by the dust extractor vacuum is dependent on its filter system. Refer to the dust extractor vacuum instruction manual for more information. All DEWALT dust collection shrouds are designed to work with the DEWALT universal DWV9000 connector. 1. Attach the DWV9000 connector (H) to your dust collector hose (K). 2. Unlock the DWV9000 connector (H) and slide onto dust port (A). 3. Lock the DWV9000 connector (H) to secure. FIG. 5 K H Dust Extraction (Fig. 1, 5) WARNING: Use only power tools recommended by DEWALT with this attachment. For more information about DEWALT power tools compatible with this attachment, please contact your local dealer, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com. WARNING: This attachment MUST BE used with a dust extractor system. ALWAYS wear certified safety face or dust mask. NOTE: Ensure hose connection is secure. A TRADITIONAL DUST EXTRACTOR VACUUM HOSES Attach recommended dust extractor vacuum hose to dust port (A). 7