Dymo 1761334 Quick Start Guide - Page 4

Become familiar with the printer's major components. See Figure 2. Top cover Label spool Label roll Serial connector USB connector Cable channel S/N 00000-0000000 USB 10101 24VDC DC power connector Label release Label feed path and tear bar Form-feed button and status light Figure 2 Serial number LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies you will ever need to buy. The form-feed button on the front of the printer advances a single label. The status light visually shows the current state of the printer: • Solid blue - USB cable is connected and printer is ready to print. • Solid green - Serial cable is connected and printer is ready to print. • Dimmed blue or green - printer is in power saving mode. • Flashing red - Labels are not loaded properly or the label roll is empty. • Flashing green - Printer is in configuration mode. Refer to the Technical Reference Guide. 2