Dymo LabelManager® 280 with 2 D1 Label Cassettes Quick Reference Guide - Page 4
Connecting the Power
View all Dymo LabelManager® 280 with 2 D1 Label Cassettes manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connecting the Power The label maker is powered by a rechargeable, lithium-ion (Li-ion) battery pack. Inserting the Battery The battery pack included with your label maker comes partially charged. Make sure the charging adapter is disconnected before handling the Li-ion battery pack. To insert the battery 1 Slide the battery compartment cover away from the label maker. See Figure 1. 2 Insert the battery into the battery compartment as shown in Figure 1. 3 Replace the battery cover. Make sure to read the Li-ion Safety Precautions found on "Safety Precautions for Lithium-ion Rechargeable Battery Pack" on page 8. Figure 1 Removing the Battery Remove the battery pack if the label maker will not be used for a long period of time. Make sure the charging adapter is disconnected before handling the Li-ion battery pack. To remove the battery 1 Unplug the charging adapter. 2 Slide the battery compartment cover away from the label maker. See Figure 1. 3 Remove the battery from the battery compartment. Make sure to read the Li-ion Safety Precautions found on page 8. 2