Dymo LetraTag® Plus LT-100T User Guide 1 - Page 20
Troubleshooting
View all Dymo LetraTag® Plus LT-100T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting Review the following possible solutions if you encounter a problem while using your labelmaker. Problem/Error Message Solution No display • Ensure the labelmaker is turned on. • Replace discharged batteries. Poor Print Quality • Replace batteries or attach power adapter. • Ensure label cassette is installed properly. • Clean the print head. • Replace the label cassette. Poor Cutter Performance Clean the cutter blade. See Caring for Your Labelmaker. Printing No action required. Message disappears when printing is finished. Too many characters Exceeded maximum number of Delete some or all of the buffer text. characters in buffer. Battery low Batteries almost discharged. Replace batteries or connect AC power adapter. Tape Jam • Remove jammed label; replace label cassette. Motor is stalled due to label jam. • Clean cutter blade. If you still need assistance, contact DYMO Customer Support. See Contacting Customer Support at the back of this User Guide to locate the contact number for your country. 20