Dynex DX-PDP42-09 User Manual (English) - Page 13

Using your TV 13 Connecting an audio receiver or Dolby Digital 5.1 sound system You can connect your TV's audio to a digital amplifier or home theater system. Back of TV HDMI 1 IN HDMI 2 IN OUTPUT VIDEO DIGITAL-AUDIO S-VIDEO1 IN L Y/C L PC IN VGA L R YPbPr1 IN Y R RL Pb Pr R L R Using the swivel base The viewing angle of your TV may be adjusted approximately 60° to the left or right as shown. L R Y YPbPr2 IN Pb Pr L R Audio cable Optical cable Audio amplifier or receiver To connect to an audio receiver or Dolby Digital 5.1 sound system: 1 Plug RCA audio cables into the OUTPUT AUDIO L (white) and AUDIO R (red) jacks on the back of your TV, then into the AUDIO L (white) and AUDIO R (red) input jacks on the audio receiver. - OR Plug an optical cable into the DIGITAL AUDIO OUTPUT jack on the back of your TV, then into to optical input jack on your Dolby Digital 5.1 sound system. 2 Press to turn on your TV. Arranging the cables After connecting the cables, bundle the cables using the cable guide as shown. Cable guide Using your TV Turning the TV on and off To turn your TV on and off: 1 Press (power) on the TV or remote control. The POWER/STANDBY indicator turns blue and your TV turns on. 2 To turn off your TV, press (power). The TV goes to Standby mode and the Power/Standby indicator turns red. Note If you are going to be away for an extended time, disconnect the power cord from the power outlet. Changing channels To change channels: • Press CH + or CH - on the front of your TV or on the remote control. To enter a channel number directly: • Press the number buttons on the remote control. In digital TV mode, a main (major) channel can have one or more sub (minor) channels. Press the number buttons to enter the main channel, press the • button (to the left of the 0 button), then press the number button for the sub-channel. For example, if you want to watch channel 5.2, press 5, press the • button, then press 2. To select a channel from the channel list: 1 Press CH-LIST. The channel list displays on the screen. 2 Press or to select the channel you want, then press ENTER to go to that channel. To go to the previous channel: • Press RECALL. Adjusting the volume You can adjust the volume using the controls on your TV's side panel or the remote control. To adjust the volume: 1 Press VOL+ or VOL- to increase or decrease the volume. 2 Press MUTE to mute the sound. To restore the sound, press this button again, or the VOL+ or VOL-. Selecting the video source To select the video source for your TV: 1 Press INPUT to display the Input Source List. 2 Press or to select the source you want (initially select TV), then press ENTER.