Dynex dx-uc202 Installation Guide - Page 1

DX-UC202 USB 2.0 CardBus Adapter Adaptateur CardBus USB 2.0 DX-UC202 Adaptador CardBus USB 2.0 DX-UC202 External power adapter plug Connecteur de l'adaptateur d'alimentation externe Conector del adaptador de alimentación externa 32-bit CardBus, PCMCIA type II connector Connecteur CardBus 32 bits, PCMCIA Type II Conector CardBus, PCMCIA Tipo II de 32 bits USB 2.0 ports Ports USB 2.0 Puertos USB 2.0 General description Congratulations on your purchase of a DX-UC202 2-Port USB 2.0 CardBus adapter. The USB CardBus Adapter provides two USB ports for connecting high-speed mass storage devices, cameras, printers, and other USB devices to a computer. Package contents • USB CardBus adapter • Quick Setup Guide Minimum system requirements PC or Macintosh: • One available CardBus or PCMCIA type II slot • Windows 7, Windows Vista, Windows XP SP1, Windows 2000 SP4, or Mac OS X 10.2.0 or higher Installing the hardware 1 Before touching the USB CardBus adapter, touch an unpainted metal portion of the computer case to safely discharge any static electricity build-up that may damage the adapter. 2 Slide the adapter into your notebook's PC Card slot until it is firmly seated, then reconnect all cables. 3 After the adapter is installed, it automatically installs the correct driver and displays confirmation and the adapter is ready for use. Note: Each USB 2.0 port may draw maximum 500mA current, with no external power supply needed in most cases. However, if you connect a high-powered device, which is over the limit of PCMCIA slot, a 5V AC/DC power adapter is needed (not included). One-year limited warranty Visit www.dynexproducts.com for details. © 2010 BBY Solutions, Inc., All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. Quick Setup Guide I Guide d'installation rapide I Guía de instalación rápida