EMC CX500 Initialization Guide - Page 30
Installing software packages, ManagementUI, MirrorViewUI, SnapViewUI, SANCopyUI, AnalyzerUI - parts
View all EMC CX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installing Optional Navisphere 6.X Software 3. On the laptop desktop, enter an IP address, subnet mask, and default gateway for your connection. Be sure the IP address is unique to this connection. You can enter the same mask and gateway specified in step 12 on page 20, but you must assign an IP address not used by SP A or B; for example, 10.4.12.138 rather than 136 or 137. 4. Open the PPP connection icon on your desktop taskbar, and disconnect the laptop-array serial connection. Installing Software Options To install software do the following: 1. If you plan to use Navisphere Manager, MirrorView, SnapView, SAN Copy, Analyzer, or Access Logix software, use the LAN connection to install the appropriate files listed below from the Navisphere Manager CD-ROM and the Access Logix CD-ROM. Install them as part of the same software installation, as described in the Navisphere Manager online help (refer to the section on Installing software packages). • ManagementUI (required for Manager) • MirrorViewUI • SnapViewUI • SANCopyUI • AnalyzerUI • File on your Access Logix CD-ROM All the UIs listed above are on the Navisphere Manager CD-ROM. 2. If you have SnapView, MirrorView, SAN Copy, or Analyzer software, install those drivers from the SnapView, MirrorView, SAN Copy, or Analyzer CD-ROM in a subsequent software installation. 30 EMC CLARiiON CX300, CX500, and CX700 Initialization Guide