EMC CX700 Initialization Guide - Page 12

Initializing the Storage System Initializing the Storage System This section describes how to set critical startup parameters on the storage system's storage processors (SPs). Before you begin the initialization process, have the network administrator at your facility assign IP addresses for the storage system, and complete the following worksheet. You will need this information to complete the system setup. Table 2 Initialization Worksheet SP A SP B Hostname Up to 15 alphanumeric characters. Dashes are acceptable. Special characters such as dots, spaces, or underscores are not allowed. Examples: Array1-A, Array1-B. IP Address Subnet Mask Gateway Change Management Port settings on SP A and SP B to EMC-specific assigned value for added security? YES____ NO____ 12 EMC CLARiiON CX300, CX500, and CX700 Initialization Guide