EVGA 121-LF-E652-KR User Guide - Page 18
EVGA 121-LF-E652-KR - P55 Micro Motherboard Manual
UPC - 843368011680
View all EVGA 121-LF-E652-KR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting Internal Headers Front Panel Header The front panel header on this motherboard is one connector used to connect the following four cables. (see Table 2 for pin definitions): PWRLED Attach the front panel power LED cable to these two pins of the connector. The Power LED indicates the system's status. When the system is turned on, the LED is on. When the system is turned off, the LED is off. Note: Some system cases do not have all four cables. Be sure to match the name on the connectors to the corresponding pins. PWRSW Attach the power button cable from the case to these two pins. Pressing the power button on the front panel turns the system on and off rather than using the onboard button. Attach the hard disk drive indicator LED cable to these two pins. The HDD indicator LED indicates the activity status of the hard disks. Table 2.Front Panel Header Pins Pin HD_LED PWRLED RESET PWRSW No Connect Empty 1 3 2 4 5 7 6 8 9 10 Signal HD_PWR HD Active PWR LED STBY LED Ground RST BTN PWR BTN Ground +5V Empty HD_LED RESET Attach the Reset switch cable from the front panel of the case to these two pins. The system restarts when the RESET switch is pressed.