EVGA 132-BL-E758-TR User Guide - Page 47

Configuring the BIOS Onboard Serial Port 1 This function on the Integrated Peripherals menu allows you to select the onboard serial port 1 function. Options are [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [Auto], and [Disabled] OnChip PATA/SATA Device Press Enter to display the OnChip PATA/SATA Device menu. AHCI Configurations SATA Mode LEGACY Mode Support [Press Enter] [IDE] [Disabled] JMB362 SATA Controller [Auto] JMB363 SATA/PATA Controller [Auto] JMB363 Mode [IDE] SATA Mode This is allows you set the onboard Serial SATA mode. IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage devices. RAID: Create a RAID 0, 1, 0+1, 5 and JBOD configuration AHCI: Use the AHCI (Advanced Host Controller Interface) to enables advanced SATA features for improved performance with NCQ and Hot-plug features LEGACY Mode Support This function allows the SATA controller to operate in LEGACY mode. Selected Disabled if you install operating system that support Native mode. JMB362 SATA Controller This function allows you to enable JMB362 SATA Controller for SATA port 6/7 control. The options are Auto, Enabled and Disabled. JMB363 SATA/PATA Controller This function allows you to enable JMB363 SATA Controller for IDE & SATA port control. The options are Auto, Enabled and Disabled. JM363 Mode This function allows you set the onboard Serial JM363 mode. The options are IDE, RAID and AHCI.