Edimax EN-9235TX-32 Datasheet - Page 2

www.edimax.com Gigabit Ethernet PCI Adapter FEATURES AND TECHNICAL SPECIFICATIONS • Supports 32-bit 33/66MHz PCI Local Bus Master high-speed operation (Rev. 2.1/2.2/2.3) • Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards • Supports 10/100Mbps full and half duplex, 1000Mbps full duplex • Supports 10/100/1000Mbps Auto Negotiation and jumbo frame • Supports IEEE 802.3x Full Duplex flow control • Supports IEEE 802.1Q VLAN Tagging • Supports PCI 2.2 Wake On LAN function • Supports PCI Message Signalled Interrupt (MSI) • Built-in FIFO buffers reduce overhead of memory transfers • Includes a Setup Wizard program • Includes a low-profile bracket • Plug-and-Play • Supports drivers for Novell 5.X/6.X, Windows 98/ME/NT4.0/2000/XP/Vista/7/8, Linux 2.4.x EN-9235TX-32 HARDWARE INTERFACE PCI Interface One 10/100/1000 Mbps LAN port COMPLIED STANDARDS LED Indicators IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, Link/Act IEEE802.3x INSTALLATION KIT Setup Wizard program with Driver setup CHIPSET Realtek RTL8169SC Single Chip HUMIDITY Operating: 10 to 90% RH (Noncondensing) Storage: 5 to 95% RH (Noncondensing) SYSTEM REQUIREMENTS BUS ARCHITECTURE CPU: Pentium III 1G above or similar Memory size: 256MB RAM One CD-ROM drive Hard Disk: Min. of 100MB disk space One available PCI slot OS:Novell 5.X/6.X, Windows 98/ME/NT4.0/2000/XP/Vista/7/8, Linux 2.4.x PCI V 2.3/2.2/2.1, 32-bit, 66/33MHz DIMENSIONS Weight 114 x 52 x 16 mm 98g TEMPERATURE Operating: 0 to 40℃ Storage: -40 to 70℃ CERTIFICATIONS CE, FCC TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.