Edimax EW-7438APn Quick Install Guide - Page 8
Reset
View all Edimax EW-7438APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
III. Reset If you experience problems with your access point, you can reset the device back to its factory settings. This resets all settings back to default. 1. Press and hold the WPS/Reset button on the front of the access point for at least 10 seconds. Release the button when the orange status LED is flashing. 2. Wait for the access point to restart. The access point is ready for setup when the orange status LED displays on. 7
7
III.
Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets
all
settings back to default.
1.
Press and hold the WPS/Reset button on the
front of the access point for at least 10
seconds. Release the button when the
orange
status LED is
flashing
.
2.
Wait for the access point to restart. The access point is ready for setup
when the
orange
status LED displays
on
.