Edimax EW-7612UAn V2 Manual - Page 45

AP Advanced

Get Edimax EW-7612UAn V2 PDF manuals and user guides View all Edimax EW-7612UAn V2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

3.8.2 AP Advanced If you want to setup advanced settings of software access point, select „Advanced‟ menu. If you don‟t know the meaning and affects of these settings, keep them untouched. Parameter Beacon Interval DTIM Period Preamble Set Defaults Apply Description Beacon Interval that specifies the duration between beacon packets (milliseconds). The range for the beacon period is between 20-1000 milliseconds with a typical value of 100. Determines the interval the Access Point will send its broadcast traffic. Default value is 3 beacons. The preamble defines the length of the CRC block for communication among the wireless stations. There are two mode including Long and Short. High network traffic areas should use the shorter preamble type. Set the setting values return to defaults. Confirm the settings in the "Advanced". 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
40
3.8.2
AP Advanced
If you want to setup advanced settings of software access point, select „Advanced‟
menu. If you don‟t know the meaning and affects of these settings, keep them
untouched.
Parameter
Description
Beacon Interval
Beacon Interval that specifies the duration between
beacon packets (milliseconds). The range for the
beacon period is between 20-1000 milliseconds with a
typical value of 100.
DTIM Period
Determines the interval the Access Point will send its
broadcast traffic. Default value is 3 beacons.
Preamble
The preamble defines the length of the CRC block for
communication among the wireless stations. There are
two mode including Long and Short. High network
traffic areas should use the shorter preamble type.
Set Defaults
Set the setting values return to defaults.
Apply
Confirm the settings in the
“
Advanced
“
.