Edimax EW-7711UMn Manual - Page 30
here. If encryption is not enabled, or you select 'WPA' as encryption
View all Edimax EW-7711UMn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
will be selected automatically, and please do not change it. If you select 'LEAP', you'll be prompted to input LEAD specific settings: Encryption WPA Preshared Key Please input LEAP identity, password, domain name, and select encryption type. You can check 'Show Password' box so the password you inputted will be displayed as you type, but not replace by asterisk. Select the encryption type of the wireless access point or wireless device you wish to connect. When you're adding a profile from an existing access point or wireless device, the encryption type will be selected automatically, and please do not modify it. Input WPA preshared key here. If encryption is not enabled, or you select 'WEP' as encryption type, this field will be disabled and grayed out. You can select key type (Hexadecimal or ASCII) and input WEP key here. If encryption is not enabled, or you select 'WPA' as encryption type, this field will be disabled and grayed out. You can set up to 4 WEP keys here. WEP Key There are two types of WEP key: Hexadecimal and ASCII. For Hexadecimal key, you can input number 0-9 and alphabet a-f; for example, '001122aabbcc'; For ASCII key, you can input number 0-9 and alphabet a-z; for example, mywepkey12345. Show Password Use 802.1x The length of WEP key depends on the type of WEP key you selected. You can input 10 or 26 hexadecimal characters and 5 or 13 ASCII characters as WEP key. Check this box and all passphrases or security keys you inputted will be displayed as you type, but not replace your input with asterisk. If the access point you wish to connect requires 802.1x authentication, please click on 'Use 802.1x' box, then click '802.1X' tab to set 802.1x parameters. 27