Edimax EW-7711USn Manual - Page 59
operating this product in US, only channels 1~11 can
View all Edimax EW-7711USn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
0: FCC (US, Canada, and other countries uses FCC radio communication standards) 1: ETSI (Europe) 2: SPAIN 3: FRANCE 4: MKK 5: MKKI (TELEC) 6: ISERAL (Channel 3 to 9) 7: ISERAL (Channel 5 to 13) Please note that only change the country code if you are in different country. For example: when operating this product in US, only channels 1~11 can be operated. Selection of other channels is not permitted under FCC regulations. No forwarding Check this box and wireless clients will not be able to share data among wireless with each other. clients Check this box and the SSID will not be broadcasted to the public. Hide SSID Your wireless clients must know the exact SSID to be able to connect to your computer. This option is useful to enhance security level. Allow BW 40 MHz Check this box to allow BW 40MHz capability. TX BURST Check this box to accelerate the data transmit rate. It may not work with all wireless access point and wireless devices. You can define the time interval that a beacon signal should be Beacon(ms) send. Default value is 100. Do not modify this value unless you know what will be affected. You can select the wireless output power here. Please select a TX Power proper output power setting according to your actual needs. You may not need 100% of output power if other wireless clients are not far from you. Select the idle time for the wireless access point. Default value is Idle Time 300. Do not modify this value unless you know what will be affected. To save changes, click 'Apply button. Or you can click 'Default' to reset all values to factory default value. 56