Edimax IC-7100 Manual

Edimax IC-7100 Manual

Get Edimax IC-7100 PDF manuals and user guides View all Edimax IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax IC-7100 manual content summary:

  • Edimax IC-7100 | Manual - Page 1
    IC-7100 / IC-7100W / IC-7100P User Manual 10-2011 / v1.0
  • Edimax IC-7100 | Manual - Page 2
    entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD-ROM. The software and specifications are subject to change without notice
  • Edimax IC-7100 | Manual - Page 3
    Table of Contents Chapter I: Getting Familiar with Your Network Camera 5 1.1 Package Contents 5 1.2 Introduction 6 1.3 Product Features 7 1.4 Key Components 8 1.5 Camera Installation 16 1.6 Locating the IP Address of this Network Camera 19 1.7 Using the Camera Admin Software to Locate the
  • Edimax IC-7100 | Manual - Page 4
    2.6.4 Utilities 78 2.6.5 Status 80 2.6.6 System Log 81 2.7 Account 82 2.8 SDHC 84 2.8.1 Status 85 2.8.2 Space Alarm 86 2.8.3 File Management 88 Chapter III: Using the Surveillance Software 89 3.1 Installing network Camera Surveillance Software 89 3.2 Using network camera surveillance
  • Edimax IC-7100 | Manual - Page 5
    5.3 Troubleshooting 167 4
  • Edimax IC-7100 | Manual - Page 6
    dealer of purchase and return the package to claim for missing contents. Item Name 1 Network Camera 2 Antenna(IC-7100W only) 3 Power Adapter 4 Ethernet Cable 5 CD ROM (Including Manual/Utility/Multi-Language QIG) 6 Accessory kit 7 Quick Installation Guide 8 Mounting Kit Quantity 1 2 1 1 1 1 1 1 5
  • Edimax IC-7100 | Manual - Page 7
    home/office safety, kid/pet monitoring, and remote video acquire etc. Edimax IC-7100 series is tailor made to stream live video over your network. You will be some places which will not be covered by camera, but this problem is completely solved by this Network camera. With built-in pan-tilt function
  • Edimax IC-7100 | Manual - Page 8
    suitable for applications like video conference or environment monitor. Pan & tilt control. Wired and wireless network (IC-7100W only, 802.11b / 802.11g / 802.11n) support Wireless data encryption (WEP / WPA) Supports DHCP and PPPoE protocol, you can also assign a fixed IP address to the camera also
  • Edimax IC-7100 | Manual - Page 9
    Wired & Wireless: Power LED Audio LED LAN LED WLAN LED POE model: Power LED Audio LED ACT LED LAN LED Item Power/ camera is powered on and ready for access to Cloud. Indicates Audio status LAN ACT (IC-7100P only) When the Network Camera is linked to a wired network, this LED will light
  • Edimax IC-7100 | Manual - Page 10
    Wireless When the Network Camera is linked to a wireless network, this LED will light up. The LED will flash while video is (IC-7100W only) transmitted or received through a wireless network. Focus Ring Microphone You can change the aim and focus of the camera by adjusting the camera head's
  • Edimax IC-7100 | Manual - Page 11
    Back View IC-7100: USB Port Power Connector SD Card Slot Audio Connector Ethernet Port 10
  • Edimax IC-7100 | Manual - Page 12
    IC-7100W: Antenna Base Ethernet Port Power Connector WPS Button SD Card Slot Audio Connector 11
  • Edimax IC-7100 | Manual - Page 13
    IC-7100P: Power Connector Ethernet Port SD Card Slot Audio Connector Item Power Connector SD Card Slot USB Port* (IC-7100 only) Audio Connector Ethernet Connector Description Connects to 12V DC power adapter Accepts SD / SD-HC memory card for image / video storage Accepts USB WiFi
  • Edimax IC-7100 | Manual - Page 14
    Antenna Base (IC-7100W only) WPS Button (IC-7100W only) Connects to supplied antenna Press the WPS button (click) on the Network Cam and click on the Access Point that you want to wirelessly connect it to. Note: The USB port only works with Edimax USB WiFi adapters. Note: Edimax EW-7711HPn, EW-
  • Edimax IC-7100 | Manual - Page 15
    Side View Reset Button Item Reset Button Description Press the button with pen nib and hold for 5 seconds to reset the camera settings to factory default value. 14
  • Edimax IC-7100 | Manual - Page 16
    Bottom View Tripod Connector Item Tripod Connect or Description Connects to tripod to secure the camera when the camera is not put on a horizontal surface. 15
  • Edimax IC-7100 | Manual - Page 17
    1.5 Camera Installation Please follow the following instructions to set your network camera up. 1. Unpack the product package and check if anything‟s missing. 2. Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this network camera. 16
  • Edimax IC-7100 | Manual - Page 18
    3. Plug the power adapter to wall socket, and connect the power connector to the power jack located at the bottom of the network camera. 4. Connect two antennas to the antenna bases, which is located at the back of this network camera. 17
  • Edimax IC-7100 | Manual - Page 19
    , please use the tripod connector (located at the bottom of the camera) to secure the camera. 6. Launch Internet Explorer on your computer, and following the instructions given in next section to set the network camera. 18
  • Edimax IC-7100 | Manual - Page 20
    1.6 Locating the IP Address of this Network Camera Default IP address of this network camera is 192.168.2.3. If you wish to assign another IP address to this network camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your
  • Edimax IC-7100 | Manual - Page 21
    2. Double-click „Network Connections‟ icon. 3. Right-click „Local Area Connection‟, and click „Properties‟. 20
  • Edimax IC-7100 | Manual - Page 22
    4. Select „Internet Protocol (TCP/IP)‟, then click „Properties‟. 21
  • Edimax IC-7100 | Manual - Page 23
    5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can use the example in the picture „192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other fields empty, and click „OK‟. If
  • Edimax IC-7100 | Manual - Page 24
    the Camera If you can‟t connect to the camera by the instructions given in last chapter, you can use camera admin software to search to locate multiple cameras on your local area network. Please insert the user manual CD-ROM supplied in the product package, and the CD will automatically running the
  • Edimax IC-7100 | Manual - Page 25
    1. Double-click Ediview finder installer, and click „Run‟ when you‟re prompted: 2. Ediview finder will list all Ediamx network cameras found on local network, with their IP address and MAC address: You can click icon to find network cameras on local network again, or select an network camera and
  • Edimax IC-7100 | Manual - Page 26
    3. Ediview finder will inspect network camera‟s connection type and if it‟s connected to Internet, this may take a few seconds, please be patient. 25
  • Edimax IC-7100 | Manual - Page 27
    4. This message will tell you if your network camera is connected to Internet (connected to the cloud), and the connection type (wired or wireless). When you see this message, click „Next‟ to continue. If you don‟t want to change network camera‟s name and password, you can click „X‟ on the upper-
  • Edimax IC-7100 | Manual - Page 28
    web browser, double-click the camera listed here. The camera admin software also provides several functions: Language change: This camera finder utility supports 3 languages: English, Chinese, and Simplified Chinese. You can select the language you wish to use from language dropdown menu located at
  • Edimax IC-7100 | Manual - Page 29
    Search camera: Click this button to search all cameras on local area network again. Configure camera: Click this button to configure camera‟s network and security setting. You‟ll be prompted to input camera‟s password: 28
  • Edimax IC-7100 | Manual - Page 30
    configure camera‟s network settings. Select „DHCP‟ to set the camera to obtain an IP address from DHCP server on local area network automatically, and select „Manual IP‟ to input the IP address information manually. Click „OK‟ to save settings. 29
  • Edimax IC-7100 | Manual - Page 31
    1.8 Logging in the Management Interface Make sure the network camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the network camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user
  • Edimax IC-7100 | Manual - Page 32
    If this is the first time you log onto web management interface, you‟ll be prompted to install ActiveX Plugin: When you see this message, please click „OK‟, and click „Download the latest ActiveX‟ link to download plugin so you can use this camera: Click „Run‟ to download plugin: 31
  • Edimax IC-7100 | Manual - Page 33
    Click „Run‟ to install plugin: Please click „Next‟ button to start installation (click „Next‟ or „Install‟ when you‟re prompted, until installation is complete). 32
  • Edimax IC-7100 | Manual - Page 34
    Click „Finish‟ to complete plugin installation. Now you can go back to web browser, and you should be able to see the image captured by camera (You may need to press F5 or CTRL-R to reload web page). 33
  • Edimax IC-7100 | Manual - Page 35
    Note: If you see one of these messages (or both): OR Your computer may not have the display capability that this network camera requires, or you don't have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft's website (http://www.microsoft.com), and try again. In some
  • Edimax IC-7100 | Manual - Page 36
    Chapter II: Using the Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and this is the only menu you can see the real-time image from camera. You can always back to this menu by clicking „Camera‟ on the top of web management
  • Edimax IC-7100 | Manual - Page 37
    The descriptions of every setting in this menu will be given below: Item Pan/Tilt Speed Video Type Frequency Flip Mode Brightness / Saturation / Sharpness Volume Description Specifies the moving speed when you use pan / tilt function to point the camera to a new direction. Available options are 1
  • Edimax IC-7100 | Manual - Page 38
    can set up to 9 preset points of camera position; press the number to move the camera to preset point instantly. See next chapter for detail instructions of how to set preset points. Press „C‟ and the camera will cruise between all preset points automatically. Click „Snapshot‟ button to save the
  • Edimax IC-7100 | Manual - Page 39
    image, you can click this button to set digital zoom: Fit to Window Size Full Screen Click „Enable‟ to enable digital zoom function, then you can drag the slide bar to adjust zoom ratio. You can also use your mouse to drag the zoom area (the green square) to reposition the zoom area. Click this
  • Edimax IC-7100 | Manual - Page 40
    2.2 Video You can change video-related settings of this network camera in „Video‟ menu. You can access this menu by clicking „Video‟ on the top of web management interface. There are 5 types of video settings for this network camera. To set the option of a certain video setting, put mouse cursor on
  • Edimax IC-7100 | Manual - Page 41
    2.2.1 MJPEG You can adjust video settings when you select „MJPEG‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1280 x 1024, 640
  • Edimax IC-7100 | Manual - Page 42
    2.2.2 MPEG4 You can adjust video settings when you select „MPEG4‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1024 x 768, 640 x
  • Edimax IC-7100 | Manual - Page 43
    2.2.3 H.264 You can adjust video settings when you select „H.264‟ as video type in „Camera‟ menu. The descriptions of every setting in this menu will be given below: Item Video Resolution Video Quality Frame Rate Description Changes the resolution of video. Available options are 1280 x 1024, 640
  • Edimax IC-7100 | Manual - Page 44
    2.2.4 OSD If you need to display information about this camera, like camera‟s name or current date / time, you can use OSD (On-Screen Display) menu: The descriptions of every setting in this menu will be given below: Item On-Screen Display Show Camera Name Show Date Show Time Description Select „
  • Edimax IC-7100 | Manual - Page 45
    2.3 Pan and Tilt This network camera supports pan and tilt function, as you explored in last section you can recall the position later again. This camera provides 9 memory slots; follow the following instructions to move the camera and set a new preset point: UPPER UP LEFT LEFT LOWER LEFT DOWN
  • Edimax IC-7100 | Manual - Page 46
    3. When you move the camera to the position you want, type a name in „Position name‟ field, and click „Set to Point n‟ (where „n‟ is the number of memory slot) button to save the position to selected memory slot. After you set the position, you can recall the position from „Camera‟ menu (click the
  • Edimax IC-7100 | Manual - Page 47
    descriptions of every setting in this menu will be given below: Item Add Edit Start / Stop Remove Description Add a new set of guard tour (see instructions below) Edit a selected guard tour. The parameters for an existing guard tour will be recalled and you can modify them. Select a guard tour and
  • Edimax IC-7100 | Manual - Page 48
    The descriptions of every setting in this menu will be given below: Item Name View with random order Available positions Description Input the name of this set of guard tour here. As you may have many sets of guard tour, please give it a meaningful name so you can remember the main purpose of this
  • Edimax IC-7100 | Manual - Page 49
    View Time: Define the time you wish the camera to stop at this position in seconds. View Order: Give this position a number greater than 1 and not the same with other positions, and guard tour will start visiting positions by order (from 1 to last number, and then start from 1 again). Remove: Remove
  • Edimax IC-7100 | Manual - Page 50
    „Network‟, network setting menu will appear. There are 6 sub-menus available here: Please click the network setting you wish to set, and then refer to instructions given below: 49
  • Edimax IC-7100 | Manual - Page 51
    2.4.1 LAN You can define IP address and select the port number you wish to use here. 50
  • Edimax IC-7100 | Manual - Page 52
    The descriptions of every setting in this menu will be given below: Item Network Type Description This camera can obtain the IP address from DHCP server automatically (if you have one), or set a fixed IP address. Select „DHCP‟ to obtain IP address automatically or „Static IP Address‟ to assign
  • Edimax IC-7100 | Manual - Page 53
    most of ISPs and will give you a nice network performance. Click „Apply‟ to save settings and make the new settings take effect. 52
  • Edimax IC-7100 | Manual - Page 54
    2.4.2 WLAN The descriptions of every setting in this menu will be given below: Item Wireless Connection Network Type Description Select „Enable‟ to activate wireless network function of this network camera, select „Disable‟ to disable it. Select the network type of wireless connection. Available
  • Edimax IC-7100 | Manual - Page 55
    Available Networks wireless access point). You can set to „Adhoc‟ when you don‟t have any wireless access point, but your computer has wireless network card. Set to „Infrastructure‟ when you have wireless access point, and you have computers with wired network connection. Here shows all wireless
  • Edimax IC-7100 | Manual - Page 56
    SSID Channel Wireless Key Self PinCode Configure via Push Button Configure via PinCode Input the SSID of the wireless access point you wish to connect. It should be less than 32 alphanumerical characters. When you select a wireless access point above, it‟s SSID will be filled in this field
  • Edimax IC-7100 | Manual - Page 57
    to apply for an account at dyndns.org (http://www.dyndns.org). Detailed instructions of how to apply a new account can be found on dyndns.org‟s website network camera, select „Disable‟ to disable it. Select dynamic DNS service provider here. Only dyndns.org is available currently. Input dynamic DNS
  • Edimax IC-7100 | Manual - Page 58
    2.4.4 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this network camera automatically (only those in the same local network). This function is useful and you don‟t have to remember the IP address of this network camera. Simply open „
  • Edimax IC-7100 | Manual - Page 59
    Click the message to open „My Network Places‟, and you‟ll see the network camera: You can double-click the icon to launch Internet Explorer and log onto network camera‟s web management interface directly. 58
  • Edimax IC-7100 | Manual - Page 60
    2.4.5 LoginFree This camera provides a method to let unauthorized users to view the image captured by this camera, which is called as „LoginFree‟. When you wish to let everyone to view the image captured by this camera, or integrate the image with your own web application, you can use this function:
  • Edimax IC-7100 | Manual - Page 61
    2.4.6 RTSP If you want to watch video captured by this network camera by your own RTSP (Real Time Streaming Protocol) media player, you can use this function to setup RTSP parameters, so your RTSP-compatible player will be able to receive video data. The descriptions of every setting in this menu
  • Edimax IC-7100 | Manual - Page 62
    MPEG4 RTSP Path H.264 RTSP Path Input the path of MPEG4 RTSP video file. When you use RTSP-compatible media player to play RTSP stream, please remember to add „.sdp‟ file extension. Input the path of H.264 RTSP video file. When you use RTSP-compatible media player to play RTSP stream, please
  • Edimax IC-7100 | Manual - Page 63
    2.5 Motion Detection When you wish to use this camera to monitor the activities, motion detection function will be very useful. Camera will detect the motion in captured image, and take a snapshot when motion is detected. So you can use this camera to keep the safety of the belongings you have. To
  • Edimax IC-7100 | Manual - Page 64
    2.5.1 Motion Detection You can use this menu to setup basic motion detection settings: The descriptions of every setting in this menu will be given below: Item Enable Motion Detection Motion Detection Interval Description Select „Enable‟ to enable motion detection, and select „Disable‟ to disable
  • Edimax IC-7100 | Manual - Page 65
    Input the maximum file size of saved file in Mbytes. Maximum file size is 100. Select „Enable‟ to save file to a network folder which supports SAMBA (also known as „Windows Network Neighborhood‟), select „Disable‟ to disable this function. If username and password are not required to write files in
  • Edimax IC-7100 | Manual - Page 66
    2.5.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which are not covered by the motion region setting, and reduce the chances of false alarm. The descriptions of every setting in this menu will be given below:
  • Edimax IC-7100 | Manual - Page 67
    Sensitivity Refresh Save Move the slide bar to change the motion detection sensitivity setting: Drag the slide to the right to increase sensitivity (camera will detect minor changes in the image), and drag the slide to the left to decrease sensitivity (camera will only detect major changes in the
  • Edimax IC-7100 | Manual - Page 68
    2.5.3 Email You can define the destination address of E-mail sending and mail server parameters here. The descriptions of every setting in this menu will be given below: Item Recipient E-Mail Address E-Mail Subject SMTP Server Description Input the email recipient‟s Email address here. Specify
  • Edimax IC-7100 | Manual - Page 69
    SMTP enable SSLv2/v3 function SMTP Authentication User Name Password Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. Some SMTP server requires mail senders to be authenticated before they can send Email. If your SMTP server requires you
  • Edimax IC-7100 | Manual - Page 70
    2.5.4 FTP Configuration You can set FTP server‟s parameters here. The descriptions of every setting in this menu will be given below: Item FTP Server FTP Port User Name Password Remote Folder Description Input the IP address or host name of the FTP server you wish to use here. Input the port
  • Edimax IC-7100 | Manual - Page 71
    know, please ask FTP server‟s administrator; most of FTP servers will work fine with both modes, but if you found that non-passive mode is not working, you can try to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file
  • Edimax IC-7100 | Manual - Page 72
    2.5.5 SD Card Configuration You can define the filename and destination folder when saving a file in SD card. The descriptions of every setting in this menu will be given below: Item Enable Cycle Recording File Name Prefix Destination Folder Description Check this box and this camera will
  • Edimax IC-7100 | Manual - Page 73
    2.6 System Info You can use this menu to get the operational information of this camera: After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Detailed descriptions of every setting will be given below. 72
  • Edimax IC-7100 | Manual - Page 74
    identify your camera on the network when you have more than one network camera in the same network. Password Confirm Password Default name begins with „IC-„ plus the last 6 characters of the MAC address of this network camera. You can modify the name to the one you can remember and meaningful
  • Edimax IC-7100 | Manual - Page 75
    Setting This setting allows you to change the date and time of the real time clock in this network camera. You can set the time manually, or use network time protocol (NTP) to set the time automatically. The descriptions of every setting in this menu will be given below: Item Set
  • Edimax IC-7100 | Manual - Page 76
    . If your area of residence uses daylight saving, select „Yes‟; otherwise select „No‟. Click to input current time of your computer to „Set Date / Time manually‟ field. Click „Apply‟ to save settings and make the new settings take effect. If you wish to use the date and time setting of the
  • Edimax IC-7100 | Manual - Page 77
    2.6.3 Schedule You can use this menu to setup Schedule Snapshot/Recording settings: Item Enable FTP Schedule Time Interval File Control Description Select „Enable‟ to send the Schedule Snapshot to the appointed FTP server, or select ‟Disable‟ to disable this function. You have to configure FTP
  • Edimax IC-7100 | Manual - Page 78
    Enable E-Mail Schedule Time Interval Enable Schedule Recording Time Interval Recording Time Select „Enable‟ to send the Schedule Snapshot to the appointed e-mail address, or select‟ Disable‟ to disable this function. You have to configure e-mail settings in „Email‟ menu first, so this function will
  • Edimax IC-7100 | Manual - Page 79
    2.6.4 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the network camera, and switch LED lights on/off. The descriptions of every setting in this menu will be given below: Item Upgrade Firmware Description If you downloaded latest firmware file from our website, you
  • Edimax IC-7100 | Manual - Page 80
    settings. Reboot Device LED Setting NOTE: IP address will be reset to default value '192.168.2.3' also. You'll need to change the IP address setting of your computer if the IP address of your computer does not begin with '192.168.2', and subnet mask is not '255.255.255.0', or you'll not be able to
  • Edimax IC-7100 | Manual - Page 81
    2.6.5 Status This menu provides all information about this network camera, like firmware version, system uptime, date / time, and network information. 80
  • Edimax IC-7100 | Manual - Page 82
    2.6.6 System Log All activities of this network camera will be logged, and you are allowed to enter „System Log‟ menu to view these logs. 81
  • Edimax IC-7100 | Manual - Page 83
    can give them user-level user name and password, so they can only view the image and can not change any system setting. This camera supports up to 16 users. After you selected „Account‟, you‟ll be prompted to input user account information: The descriptions of every setting in this menu
  • Edimax IC-7100 | Manual - Page 84
    Add Modify Remove when accessing the camera). Click this button to add the account. Modify an existing user‟s information. You have to select a user from user list first. Remove an existing user. You have to select a user from user list first. Click „Apply‟ to save settings and make the new
  • Edimax IC-7100 | Manual - Page 85
    2.8 SDHC After you selected „System Info.‟, a sub-menu will appear. There are 4 sub-menus available here: Please click the SD card setting you wish to set, then refer to instructions given below: 84
  • Edimax IC-7100 | Manual - Page 86
    2.8.1 Status Here shows the remaining card space for you. 85
  • Edimax IC-7100 | Manual - Page 87
    the sender E-mail address of the space alarm E-mail. You can set port number according to your mail server. Select „Enable‟ if your SMTP server supports SSLv2/v3 such as gmail. 86
  • Edimax IC-7100 | Manual - Page 88
    SMTP Authentication User Name Password Reserved Space Select „Enable‟ if the SMTP server you‟re using requires authentication, and input the username and password below; If the SMTP server you‟re using does not require authentication, select „Disable‟ here. If you‟re not sure, ask your ISP or
  • Edimax IC-7100 | Manual - Page 89
    2.8.3 File Management You can use this menu to manage the files stored on SD card. The descriptions of every setting in this menu will be given below: Item FirstPage PrevPage NextPage LastPage SelectAll ClearAll Delete Description Jump to first page of file list. Jump to previous page of file
  • Edimax IC-7100 | Manual - Page 90
    like video recording, after this software is installed, you can use your network camera to safeguard your property. Please follow the following instructions to install the surveillance software. 1. Click "16 channel viewer" in supplied CD-ROM, when the following window appears, click „Next‟. 2. You
  • Edimax IC-7100 | Manual - Page 91
    3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, then click „Next‟ to continue. 90
  • Edimax IC-7100 | Manual - Page 92
    4. Here lists all options you chose in previous steps, if everything‟s correct, click „Install‟ to start installing procedure, or click „Back‟ to go back to previous step to modify installing settings. 5. The installing procedure will take some time, please be patient. 91
  • Edimax IC-7100 | Manual - Page 93
    6. When you see this window, it means the software installing procedure is complete. Please click „Finish‟ to finish the procedure (network camera surveillance software will start after you click „Finish‟ button, if you want to start it later, uncheck „Launch IPCam Surveillance Software‟ box). 92
  • Edimax IC-7100 | Manual - Page 94
    3.2 Using network camera surveillance software You can click „IPCam Surveillance Software‟ icon from desktop, quick launch bar, or start menu to start the network camera surveillance software. Before you start: IP camera surveillance software will only work when your monitor's resolution is '1024 x
  • Edimax IC-7100 | Manual - Page 95
    icon will become white ). Zoom-out (To see more objects). This function is only available for supported cameras. Zoom In Zoom-in (Too see more details). This function is only available for supported cameras. PTZ control Home Recording There are 8 directions in PTZ control ring. If the camera you
  • Edimax IC-7100 | Manual - Page 96
    Playback Playback a recorded video file. Snapshot Take a snapshot of current camera. Message display Close window (stop surveillance) Displays all system messages like camera is disconnected etc. Terminates network camera surveillance software. Minimize window Minimizes network camera
  • Edimax IC-7100 | Manual - Page 97
    3.3 Configure network camera surveillance software 3.3.1 Configure cameras Before you use this network camera surveillance software, you must configure the camera(s) you wish to connect. Please click „System configure‟ button and a popup menu will appear: Please select „Configure Cameras‟ to
  • Edimax IC-7100 | Manual - Page 98
    3.3.1.1 „Camera‟ tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously: Here are the descriptions of all setting items: Item Channel Camera Search Select Refresh Name* Description Select the channel number you wish to set. All cameras
  • Edimax IC-7100 | Manual - Page 99
    . Cancel Discard all settings in this tab. *: It‟s recommended to use „Select‟ button to fill the content of this field. **: Only available for cameras support this function. After you‟ve set all channels you wish to set, click „OK‟ to save settings, and if everything‟s correct, you‟ll see the
  • Edimax IC-7100 | Manual - Page 100
    3.3.1.2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Here are the descriptions of all setting items: Item Channel One Time Schedules New (One Time Schedules) Description Select the
  • Edimax IC-7100 | Manual - Page 101
    Edit Delete New (Weekly Schedules) Please specify the time duration of this one-time schedule (the date and time of „From‟ and „To‟), then click „OK‟ to save settings. Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. You can modify a
  • Edimax IC-7100 | Manual - Page 102
    Edit Delete OK Cancel Please check all weekdays that applies, and set the start time in „From‟ field. You can set the duration of video recording in „Period‟ field (format is HH:MM:SS), and the end time will be calculated automatically and displayed in „To‟ field. You can also click „All Time
  • Edimax IC-7100 | Manual - Page 103
    3.3.1.3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera. Here are the descriptions of all
  • Edimax IC-7100 | Manual - Page 104
    3.3.1.4 Motion Record With this function activated, only motions captured by the camera will be recorded, so you don‟t have to waste hard disk storage space on images you don‟t need to pay attention to. WARNING: For applications that security is highly concerned, it's not recommended to use this
  • Edimax IC-7100 | Manual - Page 105
    triggered Send mail when motion is triggered OK Cancel Send an email to a pre-defined address when a motion has been detected by the camera. Save settings in this tab. Discard all settings in this tab. 104
  • Edimax IC-7100 | Manual - Page 106
    3.3.2 General Settings You can set system-wide settings of this network camera surveillance software in this menu. 3.3.2.1 „General‟ tab All general settings like file storage directory and recording spaces can be set here. Here are the descriptions of all setting items: Item Data Directory Free
  • Edimax IC-7100 | Manual - Page 107
    Space Max Video File Size Scan Time Cycle Recording Defines the maximum file size of every video file. When the size of file exceeds this value, network camera surveillance software will open another file to record the video. Define the time period to pause between every camera switch when you
  • Edimax IC-7100 | Manual - Page 108
    3.3.2.2 „E-Mail Setting‟ tab If you want to use motion detection function and wish to get an email that contains the image captured by the camera, please setup your email related parameters here first. Here are the descriptions of all setting items: Item E-Mail Subject Recipient E-Mail Address New
  • Edimax IC-7100 | Manual - Page 109
    Edit Delete Sender E-Mail Address SMTP Server SMTP port SMTP Auth SMTP Account SMTP Password OK Cancel Select an email address from „Recipient E-Mail Address‟ box, and click „Edit‟ to edit the email address. Delete selected email address. Specify the email address of email sender. Specify the IP
  • Edimax IC-7100 | Manual - Page 110
    3.3.2.3 Security If you don‟t want other people to access this network camera surveillance software, you can set a password to protect it. You‟ll need to input the password every time you wish to use this network camera surveillance software: To set password, please use „Security‟ tab in „General
  • Edimax IC-7100 | Manual - Page 111
    Here are the descriptions of all setting items: Item Enable Disable Password Confirm Password Description Requires password authentication when this software starts. Password authentication is not required when this software starts. Input the password you wish to use here. Input the password you
  • Edimax IC-7100 | Manual - Page 112
    111
  • Edimax IC-7100 | Manual - Page 113
    3.4 Change Display Layout This network camera surveillance software provides 8 kinds of display layout: Every layout displays different number of camera and camera arrangement, you can click the icon that presents a specific kind of layout, and the video displaying area will change accordingly.
  • Edimax IC-7100 | Manual - Page 114
    Layout style 3: 6 Displays the video of up to 6 cameras. Cameras Layout style 4: 8 Displays the video of up to 8 cameras. Cameras Layout style 5: 9 Displays the video of up to 9 cameras. Cameras Layout style 6: Displays the video of up to 10 cameras. 10 Cameras 113
  • Edimax IC-7100 | Manual - Page 115
    114
  • Edimax IC-7100 | Manual - Page 116
    Layout style 7: 13 Displays the video of up to 13 cameras. Cameras Layout style 8: 16 Displays the video of up to 16 cameras. Cameras 115
  • Edimax IC-7100 | Manual - Page 117
    3.5 Full-screen mode If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button to switch display mode to full-screen mode. To exit full-screen mode, press „ESC‟ key. 116
  • Edimax IC-7100 | Manual - Page 118
    3.6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button to switch between all configured cameras. NOTE: If a camera is configured but disconnected, it will still be displayed in a scan sequence (you'll see nothing
  • Edimax IC-7100 | Manual - Page 119
    ), click again to stop scanning (scan icon will become white ). 118
  • Edimax IC-7100 | Manual - Page 120
    3.7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope of camera‟s view, or enlarge the
  • Edimax IC-7100 | Manual - Page 121
    zoom-in, you may need to use PTZ buttons - described in next section) to find an object you wish to see its detail). 120
  • Edimax IC-7100 | Manual - Page 122
    pan - tilt function ( but this model doesn‟t support PTZ function), you can change the position that camera points to, to see different places that fall in the scope of camera‟s view. Please select a
  • Edimax IC-7100 | Manual - Page 123
    3.9 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Click snapshot button once to take a snapshot; you can take as much snapshot as you want before hard disk is full. 122
  • Edimax IC-7100 | Manual - Page 124
    ‟ button: When recording starts, you‟ll see a message displayed in message displaying box like „1/1 10:00:00, Camera 2 Start Manual‟, which means camera 1 starts recording manually on 1/1 at 10:00:00. To stop recording, click „Start Recording‟ button again, and you‟ll see a message displayed in
  • Edimax IC-7100 | Manual - Page 125
    3.11 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the video file before you can play it. There are two kinds of video search: Time Search (search all videos file that falls in a specific period of time) and Motion Search (
  • Edimax IC-7100 | Manual - Page 126
    with iPhone & Android Phones IC-7100 series features smart phone support for iPhone users and Android phone users to monitor their home using Edimax Network-Cameras. Please check following instruction for installation. The following instruction applies to all Edimax routers Step1: Ensure My-PC
  • Edimax IC-7100 | Manual - Page 127
    the I-Phone. To apply for this, refer to the Appendix "How to apply for a free DNS account in the http://www.dyndns.org " In this guide, we assume you have already got http://my-name.dyndns.org. (yours may vary) and go to Step 3. Step 3: Configure the 1st Camera based on
  • Edimax IC-7100 | Manual - Page 128
    Configure the Broadband Router based on the following: 127
  • Edimax IC-7100 | Manual - Page 129
    4.1 iPhone App Installation Please download „Ediview‟ application from Apple‟s Appstore You can launch EdiView by clicking „EdiView‟ icon. You‟ll see welcome screen and please wait for few seconds 128
  • Edimax IC-7100 | Manual - Page 130
    . Please make sure you‟re connected to wireless access point if your Edimax network camera is located on your local area network. If you want on Internet, please click 'Cameras' button to abort and setup network camera manually To view more than 4 network camera‟s live image on your iPhone, click
  • Edimax IC-7100 | Manual - Page 131
    You can click this button repeatedly to switch 1 camera / 4 cameras / 12 cameras view. You can manage network cameras in „Cameras‟ list. To add a new network camera, click „Add New Camera‟. EdiView will search for network camera on your local area network, and list all network cameras found here.
  • Edimax IC-7100 | Manual - Page 132
    or add an network camera on Internet, click 'Add Camera Manually' button. In this page, you can input network camera‟s parameters manually Camera Type: Switch operating mode between Cloud and IP. In cloud mode you have to input Cloud ID**; In IP mode you have to input
  • Edimax IC-7100 | Manual - Page 133
    Camera Name: You can define a name for this network camera to help you to remember the purpose / location of this network camera. IP: Input network camera's IP address or host name. Port: Input network camera's port number, generally it's '80'. User Name: Input the user name of network camera.
  • Edimax IC-7100 | Manual - Page 134
    Sharpness: Select video sharpness (1 to 5, lowest to highest). Video Quality: (Highest to Lowest, select a lower video quality will help when network speed is slow). Tilt Speed: Select camera pan & tilt movement speed. Click 'Done' to save changes To delete an existing IP camera, click „Edit‟
  • Edimax IC-7100 | Manual - Page 135
    Now you can back to „Live‟ menu, if you see a snapshot appear, it indicates the network camera is correctly configured. Click snapshot picture to enlarge video view If network camera you connected supports pan/tilt control, you can click 134
  • Edimax IC-7100 | Manual - Page 136
    the button on the upper-right corner to switch to „Gesture‟ mode and use your finger to slide on the live image view, and network camera will move as your finger slides A white arrow will also appear to indicate the direction of camera movement. Please note: If the button appears on upper-right
  • Edimax IC-7100 | Manual - Page 137
    All network cameras will be listed and you can choose one to see its events list. All events of selected network camera will be listed here. You can click an event to see enlarged photo. 136
  • Edimax IC-7100 | Manual - Page 138
    Event‟s snapshot and event date / time will be displayed. Click the button with network camera‟s name (upper-left corner) to go back. You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. 137
  • Edimax IC-7100 | Manual - Page 139
    Please note that you need active Internet connection to show map on your iPhone. Click 'Map' button at the bottom of your iPhone to access Map menu. Google map will be shown on your iPhone, and it will attempt to locate your current location by GPS and network. If you're using your iPhone indoor,
  • Edimax IC-7100 | Manual - Page 140
    current location manually. If the network camera you're about to mark on the map does not locate at your current location, you can also use your finger
  • Edimax IC-7100 | Manual - Page 141
    4.2 Android App installation To install Ediview application, launch „Market‟. (In your Android device‟s „All apps‟ menu) Click magnifier icon at upper-right corner of Android market, and input „Ediview‟ in search field 140
  • Edimax IC-7100 | Manual - Page 142
    You should able able to find Ediview utility (If not, please check spelling), and click „Download‟ to download and install Ediview Android will prompt you to confirm installation, please click „Install‟ button below to start installation 141
  • Edimax IC-7100 | Manual - Page 143
    Please be patient while EdiView is being installed. When EdiView utility is successfully installed, you‟ll see this message. Click „Open‟ to launch EdiView utility now, or click „Complete‟ to launch EdiView 142
  • Edimax IC-7100 | Manual - Page 144
    utility later You can launch EdiView by clicking „EdiView‟ icon in „All Applications When you launch EdiView, it will search for all Edimax network cameras on your network. Please make sure you‟re connected to wireless access point if 143
  • Edimax IC-7100 | Manual - Page 145
    your Edimax network camera is located on your local area network. If you want to add a Ediamx network camera on Internet, please click 'Manually' button to abort and setup network camera manually In this page, you can input network camera‟s parameters manually Name: You can define a name for this
  • Edimax IC-7100 | Manual - Page 146
    When an network camera has been added successfully, you‟ll see it appear in EdiView utility‟s camera list 145
  • Edimax IC-7100 | Manual - Page 147
    Please repeat last step to add more network cameras you wish to connect. To repeat last step, press 'Menu' key on your Android device and click 'Add' button If the network camera is connected, you‟ll see a picture appear. Click the Picture to view live image 146
  • Edimax IC-7100 | Manual - Page 148
    its live image Like this. You can hold your Android device horizontally to enlarge network camera‟s live image view. If the network camera you connected supports Pan & Tilt, you can click button and use your finger to slide on the live image to the direction you wish to move. 147
  • Edimax IC-7100 | Manual - Page 149
    To take a snapshot of current live image and save it on your Android device, click button. You‟ll see „Save Snapshot‟ message appear, which indicates a snapshot has been taken. 148
  • Edimax IC-7100 | Manual - Page 150
    If you have more than 1 network cameras, you can click button and you can see the image of up to 4 network cameras at the same time; Click on the camera‟s image to enlarge it You can also click same time. button to see up to 12 network cameras at the To configure the video display parameters of
  • Edimax IC-7100 | Manual - Page 151
    Click 'Done' button when you finish, or click 'Cancel' to abort. You'll see the result after you click Done'. When a new event (movement) has been detected by network camera, you‟ll see events. icon appear in network camera list. You can click it to see 150
  • Edimax IC-7100 | Manual - Page 152
    All events will be displayed here, with the time which triggered this event. Click on the event to see enlarged picture The image of this event will be displayed with the time triggered this event. 151
  • Edimax IC-7100 | Manual - Page 153
    To see enlarged picture, hold your Android device horizontally To save a snapshot of this event, click button. You‟ll see „Saved event image successfully‟ message to prompt you that image has been saved successfully. 152
  • Edimax IC-7100 | Manual - Page 154
    When you‟re in camera list, press „Menu‟ button on your Android device. A menu will appear on the bottom of EdiView utility. See live images of network cameras Use google map to locate network cameras Add a new network camera Reload network camera list 153
  • Edimax IC-7100 | Manual - Page 155
    You can use this function to mark your network camera on Google map, so you can locate them and remember their physical location easily. Please note that you need active Internet connection to show map on your Android device. Click „Map‟ button at the bottom of your Android device to access Map menu
  • Edimax IC-7100 | Manual - Page 156
    Android device indoor, your A may fail to locate your location. You can still use your finger to drag the map and find your current location manually. If the network camera you‟re about to mark on the map does not locate at your current location, you can also use your finger
  • Edimax IC-7100 | Manual - Page 157
    When you found the location where network camera is installed, press „Menu‟ button on your Android device and click „Locate‟ button and a camera list will be shown. Select the network camera you wish to mark on the map. 156
  • Edimax IC-7100 | Manual - Page 158
    , you can install JAVA from website: www.java.com and get JAVA software. (If your web browser does not support JAVA, you‟ll see this message when you try to use JAVA browser) If you‟re not login Windows as system administrator, please use system
  • Edimax IC-7100 | Manual - Page 159
    in your web browser‟s address bar: "XXXXXXXXXXXX.myedimax.com". Where XXXXXXXXXXXX is the 12 characters of your Edimax network camera‟s MAC address. If you don‟t know the MAC address of your Edimax IP camera, you can log onto network camera‟s web configuration menu and click "System" -> "System
  • Edimax IC-7100 | Manual - Page 160
    You should be able to see the image of network camera now. You can click function buttons below. Enlarge / reduce image size Click + or - button to enlarge or reduce image size, this is very useful when 159
  • Edimax IC-7100 | Manual - Page 161
    you want to see details of certain object in the image. Configure network camera Click this button to display network camera configuration menu and you can chage the parameters of IP camera. Click „Apply‟ to save changes or click „Cancel‟ to discard changes. Pan-tilt control Click this button and a
  • Edimax IC-7100 | Manual - Page 162
    Click circle located in the center or arrow set to return network camera to „Home‟ (original) position. If you no longer need to use pan-tilt function, click this button again Snapshot Click this button to take a snapshot of current image and save on your computer‟s hard drive. You‟ll be prompted to
  • Edimax IC-7100 | Manual - Page 163
    Click this button to enlarge image view to full-screen size, all functino buttons will disappear to maximumize display area. Click anywhere in the image to return to normal display mode. 162
  • Edimax IC-7100 | Manual - Page 164
    LAN/WLAN for wired and wireless model Power/Audio/ACT/LAN for POE model HTTP/Utility Includes easy-to-find and surveillance utility Provides time Supports 16 additional user accounts for viewing camera Auto sending Snap Shot or video by E-mail or FTP Support DDNS and UPnP functions Supports Windows
  • Edimax IC-7100 | Manual - Page 165
    , this is not a workable solution. To overcome this problem, an Internet service called DDNS is designed to help you trace the log of Edimax router. Note: http://www.dyndn.org is not a branch or affiliate of Edimax. No commercial relation is involved between these 2 companies. The related service
  • Edimax IC-7100 | Manual - Page 166
    First, go to http://www.dyndns.org and apply for an account. And follow the steps: Now, you could locate your home network camera using http://your-name.dyndns.org 165
  • Edimax IC-7100 | Manual - Page 167
    166
  • Edimax IC-7100 | Manual - Page 168
    If the network camera is not working properly, before you contact the dealer of purchase for help, please check the troubleshooting list here, this may help you to solve the problem by yourself and therefore saves your valuable time. Scenario I can not connect to network camera Possible Solution
  • Edimax IC-7100 | Manual - Page 169
    could be caused by a slow Internet connection, and it‟s not a problem caused by camera. However, when the network connection is slow, you to connect to Internet. Ask your ISP or network administrator for detailed instruction. a. Is the network cable or wireless connection disconnected? Please check
  • Edimax IC-7100 | Manual - Page 170
    log, if FTP upload or Email sending is failed, it will be logged, and this may give you some clue on how to solve the problem. e. Change the threshold to a more sensitive setting. I heard strange a. Please check if anything jams the camera, remove sound when I use it. pan / tilt function a. If
  • Edimax IC-7100 | Manual - Page 171
    170
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
IC-7100 / IC-7100W / IC-7100P
User Manual
10-2011 / v1.0