Edimax PRI-684 Available from Edimax USA User Manual
Edimax PRI-684 Available from Edimax USA Manual
View all Edimax PRI-684 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax PRI-684 Available from Edimax USA manual content summary:
- Edimax PRI-684 Available from Edimax USA | User Manual - Page 1
Load Balance Broadband Router User's Manual V662 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 2
Table of Contents CHAPTER 1. INTRODUCTIONS 1.1 About Load Balance Router 1.2 Interface 1.3 Package 1.4 Quick Understanding Router (FAQ) CHAPTER 2. ROUTER INTRODUCTION 2.1. 4 WAN Ports Broadband Router 2.1.1. Front Panel view 2.1.2. Real Panel View 2.1.3. LED Indicator 2.2. 2 WAN Ports Broadband - Edimax PRI-684 Available from Edimax USA | User Manual - Page 3
5.15. Display 5.2 Work Mode 5.3 System Status 5.3.1 Link Status 5.3.2 Data Monitor 5.4 WAN Configuration Configure WAN1/WAN2/WAN3/WAN4 5.4.1 Dynamic IP/CABLE Type 5.4.2 PPPoE /Dial Up DSL Type 5.4.3 Static IP /Leased DSL Type 5.5 Bandwidth Usage Control 5.6 Configure LAN&DHCP 5.7 Routing Table 5.7.1 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 4
5.12 Firmware Update 5.13. Save & Reset CHAPTER 6. IN-BOUND FUNCTION CHAPTER 7. HARDWARE LOAD DEFAULT CHAPTER 8. ROUTER SPECIFICATION CHAPTER 9. APPENDIX 9.1 TCP/IP Protocol Port Number List 4 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 5
load factory default) FG (Frame Ground) 1.3 Package 1 * Broadband Router (2 WAN or 4 WAN) 1 * CD-ROM containing Broadband Router user's manual 1 * AC Adapter suitable for your electric service 1 * Network cable with RJ-45 connectors for LAN connection When you open your package, make sure all of the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 6
included and not damaged. If you see that any components are damaged, please notify your dealer immediately. 6 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 7
working mode when I start to configure router? Q5: Can DMZ host function support PPPoE & FIX IP mode? Q6: What is configuration file back up & bandwidth usage? Q2: Can I control bandwidth usage for each computer in my network? Router Management FAQ Q1: Can I check router status from Internet? Q2: - Edimax PRI-684 Available from Edimax USA | User Manual - Page 8
VPN pass through function? Q7: Does Router support VOIP pass through function Q8: Can I limit packet go to dedicated WAN port just by protocol port number? Q9: Can I limit packet go to dedicated WAN port just by IP address? Q10: Sometime virus attack network by using "PING" command from Internet Can - Edimax PRI-684 Available from Edimax USA | User Manual - Page 9
4 WAN, 2 kinds Load Balance Router. Q2: What types of Internet Connection do you support? You can connect WAN port to ADSL modem or CABLE modem. Q3: How do my Router? Use Web Browser to configure router, follow the procedure in the manual . Q4: Do I require cooperation with my ISP? Only need to know - Edimax PRI-684 Available from Edimax USA | User Manual - Page 10
This router can list real time " configuration parameter" to administrator. Just using "configuration show" function. 10 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 11
application bandwidth usage? In "Bandwidth Usage" function, you can set bandwidth using by each application Q2: Can I control bandwidth usage for each computer in my network? Yes, in "QoS" function, allow you to control each PC bandwidth usage. 11 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 12
Router Management FAQ Q1: Can I check router status from Internet? Yes, just enable router "remote configure" function. Q2: What kind of data I can see from "Data Monitor" function? You can see "real time packet" & "accumulated packet" for each port Q3: How is link failure detected? Enable "Health - Edimax PRI-684 Available from Edimax USA | User Manual - Page 13
ADSL link? There is no problem for Router to connect ADSL support VPN pass through function? Yes, router support IPSEC & PPTP pass through function Q7: Does Router support " function in Load Balance field. Q10: Sometime virus attack network by using "PING" command from Internet, Can I set up - Edimax PRI-684 Available from Edimax USA | User Manual - Page 14
CHAPTER 2 ROUTER INTRODUCTION 2.1. 4 *WAN Ports Broadband Router 2.1.1 Front Panel View WAN LAN Power 4321 Load Balance ROUTER 2.1.2 Real Panel View WAN 24 13 DC 5V/2A FG DC INPUT FG: Ground connection. LAN Factory Reset DC 5V: Connecting to AC adapter. WAN: Broadband Router provides - Edimax PRI-684 Available from Edimax USA | User Manual - Page 15
RJ45 cable. LAN: Broadband Router provides one RJ45 type LAN port connecting to your network devices such as Hub/Switch via RJ45 cable. Using a HUB/Switch will allow more PC connecting to Broadband Router. Factory Reset: If Broadband Router occurs - Edimax PRI-684 Available from Edimax USA | User Manual - Page 16
2.2. 2 *WAN Ports Broadband Router 2.2.1 Front Panel View Power Alarm WAN LAN 1 2 10M 100M Load Balance ROUTER 2.2.2 Real Panel View WAN 2 1 DC 5V/2A FG DC INPUT LAN Factory Reset 16 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 17
broadband transmission equipments such as ADSL or CABLE Modem via RJ45 cable. LAN: Broadband Router provides one RJ45 type LAN port connecting to your network devices such as Hub/Switch via RJ45 cable. Using a HUB/Switch will allow more PC connecting to Broadband Router. Factory Reset: If Broadband - Edimax PRI-684 Available from Edimax USA | User Manual - Page 18
All NAT related function will be disable (2) The purpose for this mode is to have high through-put and NAT function both (3) Simple NAT function available (4) Act like a multi-LAN port router Mode Function PPPoE/ Dial Up DSL Type Local IP Filtering Working Mode / Function List Gateway Router - Edimax PRI-684 Available from Edimax USA | User Manual - Page 19
DOD (PPPoE) V V Bandwidth Usage V V Control QoS V V 19 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 20
2.3.2 Factory Default Value Value Function Work Mode Gateway System Status Router Basic NAT Link Status Data Monitor Default V Enable V V WAN Connect to Internet Configure Health Check WAN Type Dynamic IP Schedule Bandwidth Usage Control Configure DHCP server V LAN & DHCP Routing - Edimax PRI-684 Available from Edimax USA | User Manual - Page 21
Administration Backup & V Restore Load Factory Load Default Default Display V Save & Reset V 21 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 22
2.3.3 How to configure router This equipment provide 3 working mode for different usage, in order to set proper parameter in each function/mode, you can follow this flow chart before you start to configure router. START power on ROUTER I connect LAN cable to PC I setting PC environment I ( - Edimax PRI-684 Available from Edimax USA | User Manual - Page 23
INPUT FG LAN HUB/SWITC Factory Reset Broadband Router provides one LAN port connecting to your network devices such as PC, HUB and SWITCH via RJ45 cable. Using a HUB/SWITCH will RJ45 cable type, both WAN/LAN port support auto MDI/MDIX Function, you can choose cross over type or straight type RJ-45 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 24
3.2 Connection Procedure 1. Plug in DC power adapter to Router. 2. Connect the Router WAN port RJ45 modular jack to ADSL/CABLE Modem Ethernet port with the RJ45 cable. 3. Connect the Router LAN port RJ45 modular jack to HUB/SWITCH LAN port by RJ45 cable. 4. Connect PC LAN card port to HUB/SWITCH LAN - Edimax PRI-684 Available from Edimax USA | User Manual - Page 25
CHAPTER 4. PREPARE COMPUTER TCP/IP ENVIRONMENT 4 .1 Windows 95/98/ME 1. Select Control Panel from Start Settings. 2. Double click Network icon. 25 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 26
3. Select TCP/IP->xxxx, where xxxx is the name of network adapter you are using and then click Properties. 4. Verify your IP Address option is at Obtain an IP address automatically. 26 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 27
5. Let your Gateway setting remain empty. 27 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 28
6. Verify your DNS Configuration option is at Disable DNS, The Broadband Router will assign it automatically, then click OK. But also you may select Enable DNS, then key in the value manually if you preferred. 7. Select Run item from Start menu. Type in winipcfg and then click OK. 28 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 29
8. Select the network adapter you are using from pull-down list. Click Release All and then Renew All to get the information about IP Address, Subnet Mask, and - Edimax PRI-684 Available from Edimax USA | User Manual - Page 30
Internet Explorer • Highlight Internet Explorer on desktop and then right-click your mouse to select Properties. • Select LAN Settings in Connections tab. 30 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 31
• Uncheck the check box of Proxy server and then click OK. (You may enable Proxy server function after logout if you need to use it.) 31 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 32
Netscape • Open Netscape and click the stop button. Click Perferences from Edit pull-down list. • Select Proxies from Advanced item. Select Direct connection to the Internet and then click OK. 32 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 33
10. Type the default IP address 192.168.1.254 the address bar of the browser to open web configuration. 33 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 34
4.2 Windows 2000/XP 1. Select Control Panel from Start. 34 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 35
2. Double click Network Connections icon. 35 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 36
3. Choose the network adapter you are using and then right-click mouse to select Properties. 36 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 37
4. Select Internet Protocol [TCP/IP] and then click Properties. 5. Select Obtain an IP address automatically and DNS server address automatically. Then click OK. 6. Key in ipconfig from Start All Programs Accessories Command Prompt to view the gained IP Address, Subnet Mask and Default Gateway. 37 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 38
7. You must uncheck the Proxy server before logining the web configuration. 38 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 39
Internet Explorer • Select Internet Explorer from Start and then right-click your mouse to select Internet Properties. • Select LAN Settings in Connections tab. 39 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 40
• Uncheck the check box of Proxy server and then click OK. (You may enable Proxy server function after logout the web configuration if you need to use it.) 40 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 41
Netscape • Open Netscape and click the stop button. Click Perferences from Edit pull-down list. • Select Proxies from Advanced item. Select Direct connection to the Internet and then click OK. 8. Type the default IP address 192.168.1.254 the address bar of the browser to open web configuration. 41 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 42
CHAPTER 5 CONFIGURE ROUTER 5.1 Administration 5.1.1 Log on- Type the default IP address 192.168.1.254 in the address bar of the IE browser. Then enter default User name and password. The user name and password both are admin. LOG ON 42 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 43
Web configuration display includes . Welcome . Work Mode . System Status, . WAN Configure . Bandwidth Usage Control . Configure LAN&DHCP . Routing Table . Access Control . QoS . Load Balance . Advance . Administration . Firmware Update . Save & Reset The various configuration menus are explained - Edimax PRI-684 Available from Edimax USA | User Manual - Page 44
5.1.2 Change Password Use this function to change the Password that is used for access the web configuration. Type in the Old Password, New Password and Retype Password in their respective fields and then click Ok, the password will be changed to new one after re-boot. "Password length can up to 30 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 45
5.1.3 Load Factory Default Use Load Factory Default function to reset all the settings to their factory default values or latest configuration file. Select Yes and then click Ok, Router will restart automatically. RESET BUTTO OPTION Load Default : factory default value will be use after re-boot - Edimax PRI-684 Available from Edimax USA | User Manual - Page 46
5.1.4 Back Up & Restore Use Back Up & Restore function to save all the settings parameter to PC for safety issue, in order to avoid all parameter lose when system crush.. Back Up & Restore 46 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 47
5.1.5 Display You can this function to check all the parameter setting in this router, in order to save time to check every display. Display 47 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 48
All NAT related function will be disable (2) The purpose for this mode is to have high through-put and NAT function both (3) Simple NAT function available (4) Act like a multi-LAN port router Mode Function PPPoE/ Dial Up DSL Type Local IP Filtering Remote IP Filtering Dos Defense Virtual Server - Edimax PRI-684 Available from Edimax USA | User Manual - Page 49
Configure Proxy V V Routing protocol V V V DOD (PPPoE) V V IP Binding V V Bandwidth Usage V V Control QoS V V WORK MODE 49 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 50
5.3 System Status 5.3.1 Link Status You can get the following information in Link Status window - LAN Status, - WAN Status, - Firmware Version - DHCP TABLE LAN Status: Shows the information of MAC Address, IP Address, Subnet Mask and DHCP Status (Enable/Disable). WAN Status: Shows the information of - Edimax PRI-684 Available from Edimax USA | User Manual - Page 51
SYSTEM STATUS - Link Status (2) 5.3.2 Data Monitor Differ with Link Status window, Data Monitor window provide detail packet transfer status, it include 2 kinds of data Real Time Data happen in each WAN port Current Session TCP Session: UDP Session: ICMP Session: Total Session: Current Bandwidth - Edimax PRI-684 Available from Edimax USA | User Manual - Page 52
Remark (A): Packet starts accumulate from. * Router power on * Click " clear counter" * Counter reach upper limit number (4294967K) will reset from 0 automatically. SYSTEM STATUS - Data Monitor (1) 52 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 53
SYSTEM STATUS - Data Monitor (2) NAT Table: list current user detail NAT data. Refresh: update data monitor table to display newest data Clear Counter: reset Data Counter data to 0,re-start accumulate. 53 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 54
SYSTEM STATUS - Data Monitor - NAT Table 5.4 WAN Configuration -Configure WAN1/WAN2/WAN3/WAN4 There are several WAN function can be made in this display, you can configure functions to each WAN port separately. Connect to -Internet: WAN port is connect to Internet through ADSL/Cable modem -Intranet: - Edimax PRI-684 Available from Edimax USA | User Manual - Page 55
connect to Dial Up DSL Some ISPs require use of PPPoE to connect to their service. Connect to ISP via dial-up connecting, ISP will assign a legal IP to , Subnet Mask, Gateway and DNS. You need to indicate the static IP manually. SCHEDULE This function allow you to control each WAN port link up/down - Edimax PRI-684 Available from Edimax USA | User Manual - Page 56
10Mbps Full Duplex 100Mbps Half Duplex 100Mbps Full Duplex WAN CONFIGURE (1)- WAN1 56 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 57
WAN CONFIGURE (2)- WAN1 57 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 58
to enter the ID and Password. Sometimes you also need to input the Service Name if ISP requires for it. Max Idle Time is using to disconnect value let Broadband Router remain connecting all the time unless disconnected by user manually or ISP. If you define the period as 3, and the Broadband Router - Edimax PRI-684 Available from Edimax USA | User Manual - Page 59
Dial On Demand (DOD): auto connects function. CONFIGURE WAN - PPPOE 59 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 60
5.4.3 Static IP/Leased DSL Type If you select [Static IP/Leased DSL] , you will need to input the IP Address, Subnet Mask, Primary DNS, Secondary DNS and Gateway provided by your ISP. The picture below is an example of static IP's settings. WAN CONFIGURE - STATIC IP 60 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 61
5.5 Bandwidth Usage Control This is a very useful function, it can let you to control WAN port bandwidth usage by each protocol. Like FTP When someone use FTP to transfer file, it will occupied Heavy bandwidth, by using this function, you can limit Dedicated application bandwidth For example: In - Edimax PRI-684 Available from Edimax USA | User Manual - Page 62
BANDWIDTH USAGE CONTROL (2) BANDWIDTH USAGE CONTROL (3) 62 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 63
if you enable DHCP server function. You can also reserve some IP's to specific computers. You need to enter the name (MAC address) of the network card installed in your computer to assign a particular IP to it. Enter the relative values and then click ADD. When enable DHCP Server in "From - Edimax PRI-684 Available from Edimax USA | User Manual - Page 64
CONFIGURE LAN & DHCP (2) 64 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 65
CONFIGURE LAN & DHCP (3) CONFIGURE LAN & DHCP (4) 65 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 66
Table 5.7.1 Configure Static Routing: This function allows manually defined by users as the only path to the 's only been used for the route between two domains. In other words, router mode supports the transmission of data between two different domains via WAN port. The Broadband Routers needs - Edimax PRI-684 Available from Edimax USA | User Manual - Page 67
ROUNTING TABLE - STATIC ROUTING Router Mode Basic NAT mode: Similar to Gateway mode, the difference is that Basic NAT mode only has Basic NAT function. Once you select Basic NAT mode, all the additional function such as DoD (Dial on Demand), IP Filter, DoS and so on will be disabled. You may select - Edimax PRI-684 Available from Edimax USA | User Manual - Page 68
router learns of path to destination by receiving periodic updates from others. The protocol used in communication between routers is RIP 1/2 (Routing Information Protocol). RIP1 supports only broadcast mode while RIP2 supports broadcast and multicast mode. ROUTING TABLE - DYNAMIC ROUTING 68 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 69
5.7.2 Current Routing Table This display shows the valid routing paths in Broadband Router. Users can view the information about current routing paths. ROUNTING TABLE - CURRENT ROUTING TABLE 5.8 Access Control 5.8.1 Local IP Filtering - Gateway Mode only Broadband Router allows you to do accessed - Edimax PRI-684 Available from Edimax USA | User Manual - Page 70
Example 1, if you restrict the PC of IP 192.168.1.13-192.168.1.15 to access HTTP, the settings are: Item 1: Enable Filter entry: Block Port Number: 80 IP address: 192.168.1.13-192.168.1.15 Example 2, if you allow the PC of IP 192.168.1.16-192.168.1.18 to access FTP only, the settings are: Item 2: - Edimax PRI-684 Available from Edimax USA | User Manual - Page 71
Protocol Port No. List Protocol Service Port no. Protocol Service TCP FTP 21 TCP LADP TCP SSH 22 TCP HTTPS Port no. 389 443 TCP TELNET 23 TCP SMTP 25 UDP IKE 500 TCP RLOGIN - Edimax PRI-684 Available from Edimax USA | User Manual - Page 72
5.8.2 Remote IP Filtering - Gateway Mode only Broadband Router provides you to do accessed restriction for users. You may restrict some destination IP address that are not allow to reach IP Address: destination IP address that prohibit users to reach Enable: enable restrict function REMOTE IP - Edimax PRI-684 Available from Edimax USA | User Manual - Page 73
following by the table content. Intrusion Security 5.8.4 DoS Defense This Broadband Router also provides with DoS (Denial of Service Defense) function to protect your network servers, hosts, routers and other devices from the attacking of villain using mass data transmission. The default value in - Edimax PRI-684 Available from Edimax USA | User Manual - Page 74
DOS DEFENSE(1) 74 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 75
* Some virus are using "PING" command to attack network, this Router can be defined as accept or reject "PING" command from WAN or LAN. 75 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 76
DOS DEFENSE 76 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 77
Function Description IP Fragments Checking the IP fragments. When it finds someone from WAN side Checking tries to attack your network using overlap IP fragments in a bad attention, this function will check over these packets and drop them. IP Address Finding out whether the source address(s) - Edimax PRI-684 Available from Edimax USA | User Manual - Page 78
5.8.5 URL Filtering Besides restrict users by local/destination IP,Broadband Router provides you to do accessed restriction for user by URL as well. You may restrict some URL address that are not allow to reach Keyword: destination URL that prohibit users to reach Enable: enable restrict function - Edimax PRI-684 Available from Edimax USA | User Manual - Page 79
5.9 QoS Important feature of this router, this function can let you to set up USER BANDWIDTH with Maximum & Minimum bandwidth value. 79 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 80
rate. Weight round Configure the WAN ports bandwidth rate manually. robin Traffic Router will find the lowest loading WAN port LOAD BALANCE Weight Round Robin mode: Configure the WAN ports bandwidth rate manually, means you can Distribute each coming session from users to each WAN port - Edimax PRI-684 Available from Edimax USA | User Manual - Page 81
LOAD BALANCE Traffic Mode: Router will find the lowest loading WAN port to transmit and receive data automatically. you need to enter correct ADSL/CABLE WAN speed in here. LOAD BALANCE 81 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 82
5.10.2 Special Application Some Internet WEB server do not allow access with multi WAN address, also these WEB server was using dynamic IP address, in this case, this router can let you just define dedicated port number go to dedicated WAN port, the dedicated port was used to access these special - Edimax PRI-684 Available from Edimax USA | User Manual - Page 83
5.10.3 Special IP Assignment. Same as above mentioned , this router can let you defined dedicated IP address ( destination IP address or Source IP address) go to dedicated WAN port. 83 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 84
5.10.4 In-Bound (In-Bound Router Support Only) In-Bound function can let you load sharing traffic that coming from Internet to access you internal server to each WAN link, this function can increase WAN Utilization. For detail usage, please refer to Chapter 6 In-Bound 84 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 85
from any PC from INTERNET. If enable "remote configure" function in this display, access to the Web-based interface is available via the INTERNET, If not enabled, access is only available to PCs from LAN. Access from LAN ...... specific 192.168.1.254 in the URL field Access from INTERNET ...specific - Edimax PRI-684 Available from Edimax USA | User Manual - Page 86
if enter specific IP address, only this address PC can access from remote The address must be Internet IP addresses. Remote Port: The port number used when connecting remotely. Example: If the local user . Enable the remote configure function . Remote port is 80 (default is 80, can be different port - Edimax PRI-684 Available from Edimax USA | User Manual - Page 87
/ALG options This Router support VPN Pass Through ....... IPSEC servers providing special services on your LAN. This function can help you to do this. global port & local port mapping function, let you easily Configured internal server with same port number mapping to WAN IP different port - Edimax PRI-684 Available from Edimax USA | User Manual - Page 88
VIRTUAL SERVER/ Port Mapping 5PVTF71/1BTT5ISPVHIGVODUJPO ZPVOFFEUPDPOGJHVSFGPMMPXJOHQPSUOVNCFS JO7JSUVBM4FSWFS5BCMF-JTU 88 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 89
QSPUPDPM QPSUOVNCFS PPTP 1723 IKE (IPSec) 500 89 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 90
VIRTUAL SERVER VIRTUAL SERVER For example, Supposing you want to have four servers providing FTP, HTTP, Mail and Telnet services, you must enter four virtual servers and enable them. If users key in ftp://203.74.94.30, Broadband Router will send the data of - Edimax PRI-684 Available from Edimax USA | User Manual - Page 91
IP), you can fill in DMZ host that inside the network, the router will mapping WAN IP to internal DMZ host automatically. Multi-DMZ/Public visible to the outside world (while still being protected from DoS (Denial of Service) attacks such as SYN flooding and Ping of Death). These public servers can - Edimax PRI-684 Available from Edimax USA | User Manual - Page 92
will transmit these packets to the corresponding virtual IP(s). This Router support 3 type DMZ Host.( FIX IP Mode) - Share-DMZ only have one legal IP address provide by ISP with this function, can let you map legal IP between ROUTER WAN & LAN interface. when remote computer want to access the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 93
let most protocol to access the assigned IP on the LAN. DMZ HOST Type (3) : Public DMZ Public IP Mapping This Router provide "Public IP Mapping" function, with this function, can let you map legal IP between ROUTER WAN & LAN interface. This application will be very useful to let you connect GAME - Edimax PRI-684 Available from Edimax USA | User Manual - Page 94
and VOIP gateway .The ROUTER also allow LAN user ( like 192.168.1.xx) can access GAME SERVER or VOIP gateway. NOTE: if using "Public IP Mapping" function, the GAME SERVER & VOIP gateway will not have DoS function protect by this ROUTER. 94 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 95
5.11.4 Multi-NAT Multi-NAT function allow you to configure multiple LAN IP Domain to each WAN port( total 10 LAN IP can be defined), after configure multiple NAT function It will act like have virtual router connect to Broadband Router LAN port, all traffic between each LAN IP domain , will send and - Edimax PRI-684 Available from Edimax USA | User Manual - Page 96
5.11.6 IP Binding (Protocol Route Control) In Internet world, there have some Game Server ,SSL protocol user or Personal Server have special request for connection, these special request include. (1). Use special port number to perform specific function. (2). Not allow user connect with multiple WAN - Edimax PRI-684 Available from Edimax USA | User Manual - Page 97
IP BINDING (Protocol Route Control) 97 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 98
5.11.7 DDNS (Gateway Mode / Basic NAT Mode only) You need to apply for a free DNS domain name from www.dyndns.org. Broadband Router will update the WAN IP address to DDNS's database once a WAN port was connected to Internet if DDNS function is enabled. And the users in Internet can find out the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 99
5.11.8 Proxy This function work together with Mail Alert function, if there have Proxy Server in your local LAN, please fill in necessary Proxy information in this display. Some environment needs to fill in Proxy information. PROXY 99 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 100
5.11.9 Mail Alert - Gateway Mode / Basic NAT Mode only - Enter the Receiver/ Sender e-mail Address in the fields and check the items you want. System will send e-mails to Receiver address once the conditions meet the setting. Receiver mail address: The mail address that will receive alert mail - Edimax PRI-684 Available from Edimax USA | User Manual - Page 101
MAIL ALERT 101 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 102
5.11.10 Time (Gateway Mode / Basic NAT Mode only) Broadband Router will obtain the GMT (Greenwich Mean Time) after connected to Internet. You need to indicate the local time so that the system could show the correct time. For example, Taiwan's local time is GMT + 8 hours. Select "Automatic adjust - Edimax PRI-684 Available from Edimax USA | User Manual - Page 103
5.11.11 System Log Show all the records after Broadband Router Power on, such as WAN port up/down, WAN IP address, the obtained time, DDNS current corresponding WAN IP address and so forth. You can also save these data to files. SYSTEM LOG 103 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 104
5.11.12 MAC Address Clone If your ISP blocked the MAC address of a network card, you may use MAC Address Clone to duplicate the MAC address to the Mac address in each WAN port. Remove all Ethernet cable on - Edimax PRI-684 Available from Edimax USA | User Manual - Page 105
MAC ADDRESS CLONE you need to reboot your Broadband Router after finished cloning to make new MAC address takes effects. 105 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 106
5.12 Firmware Update Broadband Router allows you to easily update the embedded firmware. We will occasionally provide new firmware on the web site to help you updating the firmware of your Broadband Router. Follow the procedure to update your firmware after downloaded the new code. Method 1: Run a - Edimax PRI-684 Available from Edimax USA | User Manual - Page 107
107 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 108
Enter the Server Name and File Name in the new folder fields of Firmware Update window and then click Ok. FIRMWARE UPDATE You will see the updating processing. After finishing update procedure, you must reboot Broadband Router to run new code. Method 2: Double click the executable file (the file - Edimax PRI-684 Available from Edimax USA | User Manual - Page 109
FIRMWARE UPDATE The IP address of Broadband Router is 192.168.1.254 (default value). FIRMWARE UPDATE 109 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 110
Click Update to update the firmware. FIRMWARE UPDATE 5.13 Save & Reset In order to save the configuration changes that have been made to the Broadband Router you must save them to the Broadband Router's Flash memory. If you do not save the changes, the configuration settings will be lost in the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 111
NS3.DNSMADEEASY.COM NS4.DNSMADEEASY.COM We need to change www.example .com to be hosted by IN-BOUND ROUTER; so we follow the registrar's instructions and delete: NS2, NS3, and NS4, and assign: Domain servers: Domain servers: Name IP address NS0.EXAMPLE.COM WAN1 NS1.EXAMPLE.COM WAN2 The - Edimax PRI-684 Available from Edimax USA | User Manual - Page 112
domain Set Name Servers We enter WAN1 and WAN2 for Custom Name Servers. Once the above change is in effect, let us consider: 1.1 Simple Load Balancing (2 WAN lines; Session 1:1) Let us assume that the upload speed of WAN1 and WAN2 are the same; so we will use inbound load-balancing setting: Session - Edimax PRI-684 Available from Edimax USA | User Manual - Page 113
Click on [Add New Item] We will enter a make up name: host1.example.com 2 times, once for WAN1 and once for WAN2 with DNS Type: Address This display show the 1st time for WAN1. After Clicking [OK]. Repeat the immediate previous figure, one more time with the same name but this time for WAN2. You don - Edimax PRI-684 Available from Edimax USA | User Manual - Page 114
Now, we have 2 entries in the DNS table: Click on [Add New Item] again This time we are adding the DNS record with the real name that we wanted for our WEBserver. Select DNS Type: Canonical Name Name: www.example.com Host: host1.example.com We have configured the IN-BOUND ROUTER DNS server for the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 115
Now that the IN-BOUND ROUTER Inbound Load-balancing DNS Server is configured all requests from the Internet for www.example.com will return the IP address of either WAN1 or WAN2. We'll still need to configure the virtual server. In the IN-BOUND ROUTER router configuration: Advance > Virtual Server - Edimax PRI-684 Available from Edimax USA | User Manual - Page 116
We will describe Inbound Load Balancing using "Weighted round robin" algorithm for: three Internet servers: 1. Web server, www.example.com, using WAN1 - WAN2, with ratio of 1:2 2. FTP server, ftp.example.com, using WAN1 -WAN4, with ration of 1:2:3:4 3. Mail server, mail.example.com, using WAN3 & - Edimax PRI-684 Available from Edimax USA | User Manual - Page 117
Main Page > Load Balancing > Inbound > Inbound Load Balance This figure is for the 4WAN ROUTER; with the 2WAN ROUTER there will only be WAN1 and WAN2. You are entering the ratio for each WAN port into their respective fields. Add the appropriate entries into the Inbound Option table. The entries are - Edimax PRI-684 Available from Edimax USA | User Manual - Page 118
Main Page > Load Balancing > Inbound > Add New Item > Configure Inbound(Addr) for the Mail server address entry, we add: Name: mail.example.com to WAN3 rather than host3.example.com Main Page > Load Balancing > Inbound > Add New Item > Configure Inbound(Addr) similarly another address with the name: - Edimax PRI-684 Available from Edimax USA | User Manual - Page 119
Main Page > Load Balancing > Inbound > Add New Item > Configure Inbound(CName) Select Canonical Name Then Enter: Name: smtp.example.com Main Page > Load Balancing > Inbound > Add New Item > Configure Inbound(CName) Similarly, do it again for pop3.example.com. Select Canonical Name Then Enter: Name: - Edimax PRI-684 Available from Edimax USA | User Manual - Page 120
Main Page > Load Balancing > Inbound > Add New Item > Configure Inbound(MX) Since we are configuring a Mail Server: Select Mail eXchange as DNS type and enter: Name: example.com Host: mail.example.com Main Page > Load Balancing > Inbound The Mail Server is configured by the bottom 5 entries of the - Edimax PRI-684 Available from Edimax USA | User Manual - Page 121
Main Page > Advance > Virtual Server Now that we get the IN-BOUND ROUTER DNS server configured, we still have the link the WAN IP addresses to the Internal & local LAN servers. This is done by the Vertual Server. Enter Global Port Local Port Local IP Select Enable The ratio that was specified: WAN1, - Edimax PRI-684 Available from Edimax USA | User Manual - Page 122
, and the sequence will repeat. Please note: For multiple Internet servers, if you have Multiple Public Static IPs, you may use the Multiple DMZ to map public static IP address to each server. Or, if you are using Apache or Microsoft Windows Server, then you can use the Virtual Hosting and - Edimax PRI-684 Available from Edimax USA | User Manual - Page 123
CHAPTER 7. HARDWARE LOAD DEFAULT If you need to reset the settings of Broadband Router to factory default values or back to latest configuration file, please follow the description step by step to load the factory default settings or back to latest configuration file for the device. Please be - Edimax PRI-684 Available from Edimax USA | User Manual - Page 124
round robin - Traffic - TCP/IP, UDP - ARP, BOOTP - ICMP - Routing Protocol - DHCP server/client - FTP, TFTP - Telnet - PPPoE - IPSEC - PPTP - L2TP - Static Route - RIP 1 - RIP 2 - Support dyndns.org - External Switching Power Adapter with full range 110v~220v AC input 124 - Edimax PRI-684 Available from Edimax USA | User Manual - Page 125
Server Mapping support - Internet Service) protection include - Active ports scan, - TCP SYNC flood - ICMP flood - IP source route option detection - IP spoofing - Ping of death - IP fragment overlap - UDP flooding - PING oversize - WAN up - WAN down - DoS attack - System Log full - NTP (Network - Edimax PRI-684 Available from Edimax USA | User Manual - Page 126
usage - Show each WAN port bandwidth usage And traffic status Management LAN Port DMZ (De-Militarized Zone) Multi-NAT Remote Configure Virtual Server - Support Multiple DMZ - User definable - Up to 10 different LAN segment IP can be define at LAN port - con configure ROUTER through INTERNET - Bi - Edimax PRI-684 Available from Edimax USA | User Manual - Page 127
CHAPTER 9. APPENDIX 9.1 TCP/IP Protocol Port Number List Protocol Port No. List Protocol Service Port no. Protocol Service TCP FTP 21 TCP LADP TCP SSH 22 TCP HTTPS Port no. 389 443 TCP TELNET 23 TCP SMTP 25 UDP IKE 500 TCP RLOGIN
Load Balance Broadband Router
User’s Manual
V662