Edimax PRI-684 Available from Edimax USA User Manual - Page 63
Con Lan & Dhcp 1
View all Edimax PRI-684 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
5.6 Configure LAN&DHCP This function configures the LAN ports - IP address - Subnet Mask - DHCP. You can choose using DHCP server or not, the Dynamic Host Configuration Protocol (DHCP) allows the Broadband Router to dynamically assign IP addresses to network devices. Dynamic IP assignment alleviates the need for the network administrator to maintain and monitor IP address assignments and simplifies IP use because the IP addresses are automatically and dynamically assigned when a station powers-on. You will need to indicate the range of DHCP server and DNS address if you enable DHCP server function. You can also reserve some IP's to specific computers. You need to enter the name (MAC address) of the network card installed in your computer to assign a particular IP to it. Enter the relative values and then click ADD. When enable DHCP Server in "From", "TO" field, you can reserve up to 253 IP address to DHCP server. Fill in local DNS Server IP address in "DNS Address" field, you can ask your local ISP to provide this information. CONFIGURE LAN & DHCP (1) 63