Edimax PT-111E Manual
Edimax PT-111E Manual
 |
View all Edimax PT-111E manuals
Add to My Manuals
Save this manual to your list of manuals |
Edimax PT-111E manual content summary:
- Edimax PT-111E | Manual - Page 1
Network Camera User's Manual PT-111E / PT-112E & MD-111E User manual 08-2013/ v1.1 1/59 - Edimax PT-111E | Manual - Page 2
Network Camera User's Manual Table of Contents Overview ...3 Package Contents 4 Connections ...5 Hardware description 5 Slide control (PT-111E / PT-112E only 31 Application ...33 Storage ...36 Syslog ...38 Status and Parameters 39 Maintenance ...40 Appendix ...42 A. Troubleshooting & Frequently - Edimax PT-111E | Manual - Page 3
Manual H.264 Pan/Tilt IR Network Camera Overview PT-111E / PT-112E & MD-111E guide‖ before the Network Camera is installed, then carefully read and follow the instructions or above System Requirement for Viewer & Recorder Application Support OS XP, Windows 7 System Hardware 1-4 cameras - Edimax PT-111E | Manual - Page 4
Network Camera User's Manual Package Contents If any of the above items are missing, please contact your dealer immediately. Network Camera (Wired or PoE) Software CD Power adapter Screws Quick installation guide RJ45 Female Note: Using a power supply with a different voltage than the one - Edimax PT-111E | Manual - Page 5
Network Camera User's Manual Connections Hardware description Outer View Wired cover Slide cover Inner View Light sensor Lens IR LED Internal Microphone Reset button Micro SD/SDHC card slot 5/59 - Edimax PT-111E | Manual - Page 6
Network Camera User's Manual Hardware Installation 1. Attach the Network Camera with the included stand 2. Place the Camera fix it onto ceiling or wall Use screws to fix the Network Camera onto the ceiling or wall. 6/59 - Edimax PT-111E | Manual - Page 7
Network Camera User's Manual 3. Power over Ethernet (PoE) Using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Follow - Edimax PT-111E | Manual - Page 8
Network Camera User's Manual Connect to the Network Camera Locate the IP address of Network the CD. Note: We recommend that you use Microsoft Windows to install your network camera - Mac is not supported. 1. Insert the CD into your CD-ROM drive. When the wizard appears, click ―Setup Utility‖ to install - Edimax PT-111E | Manual - Page 9
Network Camera User's Manual Note: The contents of the CD-ROM can also be downloaded from the Edimax website: http://www.edimax.com/en/index.php 2. After the installation is complete, double-click the ―EdiView_Finder‖ icon to execute the application. 3. Press ‗Discover' button to search for all - Edimax PT-111E | Manual - Page 10
Network Camera User's Manual Initial Access to the Network Camera (1) For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a - Edimax PT-111E | Manual - Page 11
Network Camera User's Manual 2.The video will be displayed. 11/59 - Edimax PT-111E | Manual - Page 12
Network Camera User's Manual Primary user's capability Main Screen with Camera View The main page has three parts: 1. Configuration functions: The camera can be configured using these user interfaces. 2. - Edimax PT-111E | Manual - Page 13
Network Camera User's Manual Camera view: On the top of image shows the connecting specified area in the camera view. 3. Click this button to switch to full screen mode. Press the ―Esc‖ key to switch back to normal mode. 4. Click on this button freeze the video, and playing when you click again - Edimax PT-111E | Manual - Page 14
Network Camera User's Manual Pan/Tilt & connection control buttons: (PT-111E / PT-112E only) 1. "Connection" User can choose Remote or Local mode for best connection quality. Proposal: Internet environment, switch Remote mode. 2. "Video Stream" User can - Edimax PT-111E | Manual - Page 15
Network Camera User's Manual Client Setting 1. "Video output setting" Setting video output format. "Stream" Select use multiple stream video. "Picture" Select use serial video picture. 2. "Intranet Protocol Options" Setting - Edimax PT-111E | Manual - Page 16
Network Camera User's Manual "Folder" Specify the storage destination for the recorded video files. "File name prefix" Enter the environment is changed, or the user wants to let the web browser to detect again, manually select the UDP and TCP protocol, save, and return HOME to re-connect. 16/59 - Edimax PT-111E | Manual - Page 17
Network Camera User's Manual Definitions in Configuration Please note that only the Administrator can access the system configuration. System parameters Firmware version 1. "General Setting" (1) "Host name" The text displays the title on the top of the main page. (2) "LED indicator" Select turn on - Edimax PT-111E | Manual - Page 18
the system is turned off. (B) "Sync with computer time" Synchronize the date and time in the Network Camera according to the local computer. (C) "Manual" Adjust the date and time by the Administrator. (D) "Adjust by NTP server" Synchronize the time according NTP server over the Internet whenever the - Edimax PT-111E | Manual - Page 19
Network Camera User's Manual Security Security setting The administrator account name is ―root‖, which is permanent and can not be deleted. If you want to add more accounts in - Edimax PT-111E | Manual - Page 20
Network Camera User's Manual setting. (2) "Delete a user" Select an existing user name. Click Finish to enable the setting. (3) "Update a existing user" Select an existing user name. Administrators can modify - Edimax PT-111E | Manual - Page 21
Network Camera User's Manual Network Any changes made on this page will restart the system in order to validate the changes. Make sure every field is entered correctly before - Edimax PT-111E | Manual - Page 22
Manual access names" The RTSP streaming currently supports video only, audio only, and audio ip-discovery), Email, Key, and Confirm Key, then click Register services. Please connect to the service provider's website to make sure the service charges. 5. "Host Name" If the User wants to use DDNS service - Edimax PT-111E | Manual - Page 23
IP address. Note: when this field is input as ―User name‖, the following field must be input as ―Password‖. 7. "Password" Please input the password or key to get the DDNS service. 8. "finish" Click on this button to save modify settings for the DDNS - Edimax PT-111E | Manual - Page 24
Network Camera User's Manual Access list Access list setting 1. "Add denied address" This rule allows the user to assign a range of IP addresses to the Deny List. 2. "Delete denied address" Delete IP address list from the Address List. 24/59 - Edimax PT-111E | Manual - Page 25
Network Camera User's Manual Audio and Video setting General Setting 1. "Color mode" Select use color or monochrome video display. 2. "Video orientation" The orientation of video (1) "Flip" Vertically rotate the video. 25/59 - Edimax PT-111E | Manual - Page 26
on/off the built-in IR led. This function is very useful under low illumination environment. (1) "Auto" Select IR sensitivity from 0 to 4. (2) "Manual" Turn on/off the IR led manually. - "Turn on" Turn on led - "Turn off" Turn off led 2. "Low lux mode" The video quality will be improved when the - Edimax PT-111E | Manual - Page 27
Network Camera User's Manual Video record Schedule mode (1) "Every day" Enable/Disable every day application. (2) "Week day" Enable/Disable week day application. (3)"Selected day" Enable/Disable selected day application. - Edimax PT-111E | Manual - Page 28
Network Camera User's Manual to overwrite the previously saved videos. Record parameters (1)Source: Select a stream for the recording source. (2)Recording interval: Select the recording time interval. (3)Prefix file name: - Edimax PT-111E | Manual - Page 29
Network Camera User's Manual Stream Audio codec setting (1)"Audio codec type" There are two choices of audio codec types available: "AMR"、 "AAC" and "G. , 24Kbps and 32Kbps. -- "G.711" pcmu and pcma. Video codec setting (1) "Select Stream" The Network Camera supports "Stream 1"and "Stream 2". 29/59 - Edimax PT-111E | Manual - Page 30
Network Camera User's Manual (2) "Video codec" The Network Camera supports three kind of video compression mode: "H.264" or "MPEG4‖ or "MJPEG". User can choose one of these compression modes based on requirement or application (3) "Video - Edimax PT-111E | Manual - Page 31
Network Camera User's Manual Camera control (PT-111E / PT-112E only) Camera control The pan and tilt functions can be controlled with these buttons. The "Left" button controls the camera to the left; - Edimax PT-111E | Manual - Page 32
Network Camera User's Manual (3) "Tilt angle" This sets the range of the vertical movement of auto pan range to original default's auto pan range by clicking on this button. --"Set the auto pan range manually" Click on the button will set the auto pan range of the Network Camera. (3)" Add or delete a - Edimax PT-111E | Manual - Page 33
Network Camera User's Manual Application Schedule mode (1) "Every day" Enable/Disable every day application. (2) "Week day" Enable/Disable week day application. (3) "Selected day" Enable/Disable selected day application. Schedule - Edimax PT-111E | Manual - Page 34
is able to track dynamic objects within screen video. *(PT-111E / PT-112E only)* parameters (1) "Motion parameters" Higher sensitivity --"Server port" The default mail server port is set to 25. You can also manually set another port. (2)"FTP" -- "Server address" Enter the domain name or IP address - Edimax PT-111E | Manual - Page 35
Network Camera User's Manual -- "User account" Enter the user name if necessary. -- "User password" Enter the password if necessary. (4)"NAS" --"NAS server address" Enter IP address of the NAS - Edimax PT-111E | Manual - Page 36
Network Camera User's Manual Storage Manage the storage device. 1 2 3 Storage Status Here show the storage device information. NAS server setting (1) ―NAS Host name‖ Choose and input the NAS Host - Edimax PT-111E | Manual - Page 37
Network Camera User's Manual camera. File operation Move the mouse over the file. Press the mouse right button that Right-click menu is displayed. You can delete files. Move - Edimax PT-111E | Manual - Page 38
Network Camera User's Manual Syslog The Network camera supports log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with sys log service, use ―-r‖ option to turn on the facility for receiving log from remote machine. Or you can use some - Edimax PT-111E | Manual - Page 39
Network Camera User's Manual Status and Parameters User can find a lot of information about the system such as "Upnp port forwarding", "Traversing NAT", "Public IP", and so on. User also can get the number of current viewer of the Network Camera here. 39/59 - Edimax PT-111E | Manual - Page 40
Network Camera User's Manual Maintenance 1. "Reboot system" The "Reboot" button will reboot the Network Camera. It's useful while the Network Camera got problem. 2. "Restore system" Click on ―Restore‖ button on the configuration page to restore the factory default settings. Restore all settings to - Edimax PT-111E | Manual - Page 41
Network Camera User's Manual 4. "Export/Import file" -- Export setting backup file: Click to export all parameters for the device and user-defined scripts. -- Upload setting backup file: Click Browse... to upload a setting backup file. Please note that the model and firmware version of the device - Edimax PT-111E | Manual - Page 42
Manual Appendix A. Troubleshooting that category 5 UTP cable is plugged correctly. If the problem is still not solved, please contact your dealer for further help By UPnP Port Forwarding 1. Select an IP router. It must support UPnP port forwarding and enable this function first!! 2. Connect camera - Edimax PT-111E | Manual - Page 43
ddns name at below label of camera on browser URL field. For example, you may type ah00001.ip-discovery.com:8080. (2) By Setting Port Forwarding Manually 1. Select a router. Set the port forwarding as following. 43/59 - Edimax PT-111E | Manual - Page 44
Network Camera User's Manual PS. Port 80 is HTTP Port, port 53 is stream port, port 554 is RTSP port. and port 443 is HTTPS port. 2.Go to camera Network page. Disable UPnP port forwarding function. 44/59 - Edimax PT-111E | Manual - Page 45
Network Camera User's Manual 3. Type IP address at browser. Then you can see camera through Internet. 4. the subnet of network camera is same as your PC. If the local area network supports DHCP, the camera is ―Get IP address automatically‖ in the ―Network‖ page default. If the local area network - Edimax PT-111E | Manual - Page 46
is attached. Clean the lens with lens cleaner. And then adjust the camera focus manually. (2) The image may be out of focus. If the object is too near, (4) the position of the network camera. Q12: The process of upgrade firmware abort. A12: Contact your dealer for further help. Q13: Cannot access - Edimax PT-111E | Manual - Page 47
the router may prohibit access from an external network. Refer to your router's manual for details. • Access Network Camera from the Internet with the global IP address used by another device or computer. • If the problem is not solved, the Network Camera might be faulty. Contact your dealer for further help. - Edimax PT-111E | Manual - Page 48
Network Camera User's Manual ip-discovery.com(Free DDNS service) 1. When you want to connect the network camera over Internet, you can use the service ―ip-discovery.com‖. The ―ip-discovery.com‖ is a free DDNS server for this camera. Make sure that the router must start UPnP and DHCP server - Edimax PT-111E | Manual - Page 49
Network Camera User's Manual 2. The free server is acted as an internet IP finder. For more services from the free Server, just running IE browser and input the host name http://ip-discovery.com/ Select language. 49/59 - Edimax PT-111E | Manual - Page 50
Network Camera User's Manual Current device In other cameras in the same registered e-mail will become a group. 50/59 - Edimax PT-111E | Manual - Page 51
Network Camera User's Manual Federal Communication Commission Interference Statement This equipment has been tested and radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee - Edimax PT-111E | Manual - Page 52
Network Camera User's Manual EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, - Edimax PT-111E | Manual - Page 53
Network Camera User's Manual EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. French: Cet é - Edimax PT-111E | Manual - Page 54
Network Camera User's Manual WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it - Edimax PT-111E | Manual - Page 55
Network Camera User's Manual We protect your rights with two steps: (1) copyright the software, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is - Edimax PT-111E | Manual - Page 56
Network Camera User's Manual separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole - Edimax PT-111E | Manual - Page 57
Manual , but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT - Edimax PT-111E | Manual - Page 58
Network Camera User's Manual INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA - Edimax PT-111E | Manual - Page 59
Network Camera User's Manual 59/59
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
 |
 |
Network Camera User
’
s Manual
1/59
PT-111E / PT-112E & MD-111E
User manual
08-2013/ v1.1