Edimax PT-112E Manual - Page 21
Network
View all Edimax PT-112E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Network Camera User's Manual Network Any changes made on this page will restart the system in order to validate the changes. Make sure every field is entered correctly before clicking on "finish" Network Setting "LAN" & "PPPoE" The default type is LAN. Select PPPoE if using ADSL 1. LAN The default status is Get IP address automatically. This could be tedious to perform software installation whenever the Network Camera starts. Therefore, once the network is set, especially for the IP address should be entered correctly. Select Use fixed IP address then the Network Camera will skip installation. The Network Camera will automatically restart and operate normally after a power outage. You can run IP installer to check the IP address assigned to the Network Camera if the IP address is forgotten, 21/59