Electrolux E23BC69SPS Product Specifications Sheet English - Page 3

Built-In Look Cutout Dimensions

Page 3 highlights

E23BC69SPS (no dispenser) French Door Refrigerator E23BC69SPS professional series Standard Refrigerator Depth vs. Counter Depth Counter Depth 23 5/8" A C B "Built-In Look" Cutout Dimensions (A) 70 1/4" (B) 36" (C) 25" 28 1/2" Standard Depth Top View Recessed water line Recessed electrical outlet 24" Cabinet Allow 1" min. clearance at rear for proper air circulation and water / electrical connections 25" Side Panels, 1/2" min. width 25" Countertop 26 7/8" 36" Doors 35 5/8" Cabinet 69 1/2" with 3/8" rollers 68 3/16" with 3/8" rollers Water line inlet location (left bottom rear) 23 5/8" Power cord location (right bottom rear) 29 1/2" 46" (with drawer 42 9/16" (with doors 90° open) fully extended including handle) Counter-Depth French Door Refrigerator Specifications • Product Weight - 342 Lbs. • An electrical supply with grounded three-prong receptacle is required.The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating -120V/60Hz • Connected Load (kW Rating) @120 Volts = 1.02kW • Amps @120 Volts = 8.5 Amps • Always consult local and national electric & plumbing codes. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer/ crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90° door swing which will provide drawer/crisper access with restricted removal.) • To ensure optimum performance, avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). Electrolux Major Appliances, N.A. • Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. • Adjustable front rollers to assist with door alignment. • If optional Collar Kit (PN# ECK23CDS) is to be used, different cutout dimensions are required. (Refer to Collar Kit ECK23CDS Installation Specifications page on web.) • If optional Louvered Trim Kit (PN# 241723001) is to be used, different cutout dimensions are required. (Refer to Louvered Trim Kit 241723001 Installation Specifications page on web.) • "Built-In Look" Specifications • Minimum opening of 70-1/4"H x 36"W x 25"D required to allow for ease of installation, proper air circulation, and plumbing/ electrical connections. • Remove all wall/floor molding prior to installation. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Optional Accessories • Collar Kit - (PN# ECK23CDS). • Louvered Trim Kit - (PN# 241723001). • PureAdvantage® Water Filter Replacement Cartridge - (PN# EWF02). • PureAdvantage® Air Filter Replacement Cartridge - (PN# EAFCBF). USA • 10200 David Taylor Drive • Charlotte, NC 28262­­• 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca E23BC69SPS 09/17 © 2017 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice.

  • 1
  • 2
  • 3

High standards of quality at Electrolux Home Products, Inc.
mean we are constantly working to improve our products.
We reserve the right to change specifications or
discontinue models without notice.
Electrolux Major Appliances, N.A.
USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca
E23BC69SPS 09/17
© 2017 Electrolux Home Products, Inc.
French Door Refrigerator
E23BC69SPS
professional series
“Built-In Look” Cutout Dimensions
(A) 70
1
/
4
"
(B) 36"
(C) 25"
42
9
/
16
"
(with doors
90
°
open)
23
5
/
8
"
46"
(with drawer
fully extended
including handle)
68
3
/
16
"
with
3
/
8
"
rollers
26
7
/
8
"
69
1
/
2
"
with
3
/
8
"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
29
1
/
2
"
35
5
/
8
"
Cabinet
36"
Doors
24"
Cabinet
25"
Countertop
Recessed
water line
Recessed
electrical outlet
25" Side Panels,
1
/
2
" min. width
Allow 1" min. clearance at rear
for proper air circulation and
water
/
electrical connections
Standard Depth
Standard
Refrigerator Depth
vs. Counter Depth
23
5
/
8
"
Counter Depth
28
1
/
2
"
B
C
A
Top View
Counter-Depth French Door Refrigerator Specifications
Product Weight – 342 Lbs.
An electrical supply with grounded three-prong receptacle is required.The
power supply circuit must be installed in accordance with current edition of
National Electrical Code (NFPA 70) and local codes & ordinances.
Voltage Rating –120V/60Hz
Connected Load (kW Rating) @120 Volts = 1.02kW
Amps @120 Volts = 8.5 Amps
Always consult local and national electric & plumbing codes.
Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.
When installing refrigerator adjacent to wall, cabinet or other appliance that
extends beyond front edge of unit, 20" minimum clearance recommended
to allow for optimum 120° to 180° door swing, providing complete drawer/
crisper access and removal.
(Absolute 4-1/2" minimum clearance will
ONLY allow for 90° door swing which will provide drawer/crisper access
with restricted removal.)
To ensure optimum performance, avoid installing in direct sunlight or close
proximity to range, dishwasher or other heat source.
For proper ventilation, front grille MUST remain unobstructed.
Recess electrical outlet when possible.
Water recess on rear wall recommended to prevent water line damage.
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
Copper tubing with 1/4" O.D. recommended for water supply line with
length equal to distance from rear of unit to household water supply line
plus 7 additional feet. Optional Water Supply Installation Kits available.
Adjustable front rollers to assist with door alignment.
If optional Collar Kit (PN# ECK23CDS) is to be used, different cutout
dimensions are required.
(Refer to Collar Kit ECK23CDS Installation
Specifications page on web.)
If optional Louvered Trim Kit (PN# 241723001) is to be used, different
cutout dimensions are required.
(Refer to Louvered Trim Kit 241723001
Installation Specifications page on web.)
“Built-In Look” Specifications
Minimum opening of 70-1/4"H x 36"W x 25"D required to allow for ease
of installation, proper air circulation, and plumbing/ electrical connections.
Remove all wall/floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
Collar Kit – (PN# ECK23CDS).
Louvered Trim Kit – (PN# 241723001).
PureAdvantage
®
Water
Filter Replacement Cartridge – (PN# EWF02).
PureAdvantage
®
Air
Filter Replacement Cartridge – (PN# EAFCBF).