Electrolux E23BC78ISS Owners Guide - Page 7
To level the cabinet using the front rollers select, models
UPC - 012505746338
View all Electrolux E23BC78ISS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation 7 To level the cabinet using the front rollers (select models): 1 Remove the screw from each side of the toe grille (see illustration). 2 Pull the toe grille forward and lift it off (see illustration). 5 After unit is leveled, lower anti-tip leg until it contacts the floor. 3 Use a flat-blade screwdriver or ³⁄₈-inch socket wrench to raise or lower the front rollers. 4 Ensure both doors are bind-free with their seals touching the cabinet on all four sides. NOTE The anti-tip leg must be in contact with the floor to keep the refrigerator stable. DO NOT use the anti-tip leg to level the refrigerator. 6 Replace the toe grille by fitting it into place and replacing the screws.
7
To level the cabinet using the front rollers (select
models)
:
1
Remove the screw from each side of the toe grille
(see illustration).
2
Pull the toe grille forward and lift it off (see
illustration).
Installation
6
Replace the toe grille by fitting it into place and
replacing the screws.
5
After unit is leveled, lower anti-tip leg until it
contacts the floor.
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator stable.
DO NOT use the anti-tip
leg to level the refrigerator.
3
Use a flat-blade screwdriver or
³⁄₈
-inch socket
wrench to raise or lower the front rollers.
4
Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.