Electrolux E30IC75FSS Use and Care Manual - Page 15

Setting Surface Controls 15 OPERATING THE COOKING ZONES (CONT'D) To Turn ON one or more of the Cooking Zones (cont'd) NOTE: Touch once, or repeatedly touch the or key pads to adjust or scroll through power levels at any time during the cooking process (To scroll through the power levels quickly touch and hold the or key pads until the power level desired is reached). Once the Cooking Zone power level has been set the food will begin to heat at that level until the power level is manually changed. For more information about the available Cooktop Zones power levels available see "Power Level Settings" section on page 10. IMPORTANT OPERATING NOTES: • Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to turn OFF while cooking. Clean the spills or remove the objects from the cooktop. • Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop internal sensor may shut OFF of the cooktop to avoid over heating the appliance. • If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect the situation and the cookware will no longer heat. The affected Cooking Zone LED will flash between F and the last power level set for the Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes before the Cooking Zone will automatically shut OFF. To Turn OFF the Cooking Zones: 1. Once cooking is complete, touch the key pad to turn the Cooking Zone OFF. On/Off 2. The corresponding Cooking Zone ON/OFF Indicator light located above the key pad On/Off will turn OFF. A beep will sound and the chosen Cooking Zone power level LED will display 0. If no other key pads are touched the Cooking Zone will shut OFF automatically in 5 seconds. If no other Cooking Zones are active and no other key pads are touched the entire cooktop will shut OFF automatically in 5 more seconds. 3. When any Cooking Zone is OFF, the corresponding Cooking Zone LED may display H if the Cooking Zone temperature is too HOT. The LED will continue to display H , and even if the Cooktop is switched OFF the LED will continue to display H as long as the cooktop remains HOT. CAUTION The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT form residual heat transfered from the cookware and burns may occur.