Electrolux E30IC75FSS Installation Instructions - Page 2
should be avoided. If cabinet storage is - cutout
View all Electrolux E30IC75FSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INDUCTION COOKTOP INSTALLATION INSTRUCTIONS Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) 30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper. AMin. K Min. Recommended Distance Between Rear Edge of Cutout and Nearest Combustible 10" Surface Above ( 25.4 cm) Countertop 18" G (45.7 cm) I H 24" (61 cm) 12" (30.5 cm) J Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit). * Letters on this figure refer to chart on front page except for J and K. Approximate Location of Junction Box 2 1/2" (6.4 cm) Min. From Edge of Cutout to Front Edge of Countertop It is not recommended to use drawer underneath cooktop. Empty space is needed for installation purpose. CAUTION To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. MODEL 30" J 7½" (19.1 cm) K 1½" (3.8 cm) Figure 2 - COUNTERTOP CUTOUT OPENING 2