Electrolux E32AF75GTT Use and Care Guide - Page 5
Electricalinformation
View all Electrolux E32AF75GTT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ELECTRICALINFORMATION [] [] [] III III [] III [] [] [] Refer to the serial plate for correct electrical rating. The power cord of the freezer is equipped with a three-prong grounding ptug for protection against shock hazards. It must be plugged directly into its own properly grounded three-prong receptacle, protected with a 15 amp time delay fuse or circuit breaker. The power supply circuit must be installed in accordance with current edition of the National Electrical Code (NFPA 70) and local codes and ordinances. Consult a qualified electrician. Receptacles protected by Ground Fault Circuit Interrupters (GFCi) are NOT RECOMMENDED. DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG. * If the voltage varies by 10 percent or more, freezer performance may be affected. Operating the freezer with insufficient power can damage the motor. Such damage is not covered under the warranty. If you Do not, under -"_ any circumstances, / cut, remove, / or bypass the / grounding prong. .J } suspect your household voltage is high or low, consult your power company for testing. * To prevent the freezer from being turned off accidentally, do not ptug the unit into an outlet controlled by a watt switch or putl cord. * Unplug the freezer before cleaning and before replacing a light butb to avoid electrical shock. Power cord with 3-prong grounded plug , Do not pinch, knot, or bend the power cord in any manner. Other Precautions • Never unplug the freezer by pulling on the power cord. Always grip the plug firmly and putl straight out from the receptacle. • Turning the control to "OFF" turns off the compressor but does not disconnect power to the light butb or other electrical components.