Electrolux EDW5505E Use and Care Manual - Page 16

Rinse Aid

Page 16 highlights

16 Dishwasher Use Add recommended amount of detergent to each cup as shown and close the detergent lid. Do not use detergent with the Rinse cycle. Leave the detergent lid open when running Rinse. RINSE AID Regular use of a rinse aid improves drying, reduces spotting and filming, and reduces moisture left on the dishwasher interior. An automatic rinse aid dispenser is located next to the detergent cup. The window next to the dispenser cap indicates when the rinse aid reservoir needs to be refilled. When the level of rinse aid is below the indicator marks and the window is nearly clear, it is time to refill the dispenser. Check the dispenser monthly. To add rinse aid to the dispenser, turn the cap counterclockwise to open. Remove the cap and pour liquid rinse aid into the opening. The amount of rinse aid dispensed during the cycle is adjustable by moving the lever inside the reservoir area. For most water conditions use the manufacturer recommended MAX setting of "3". Adjust it up to the "MAX" setting for hard water. Set the lever anywhere between these amounts as needed to get the best results. Replace the cap and turn it clockwise to close.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

16
Dishwasher Use
Add recommended amount of detergent to each cup as shown and close
the detergent lid.
Do not use detergent with the Rinse cycle.
Leave the detergent lid open
when running Rinse.
RINSE AID
Regular use of a rinse aid improves drying, reduces spotting and filming,
and reduces moisture left on the dishwasher interior.
An automatic rinse aid dispenser is located next to the detergent cup.
The window next to the dispenser cap indicates when the rinse aid reservoir
needs to be refilled.
When the level of rinse aid is below the indicator marks and
the window is nearly clear, it is time to refill the dispenser.
Check the dispenser
monthly.
To add rinse aid to the dispenser, turn the cap counterclockwise to open.
Remove the cap and pour liquid rinse aid into the opening.
The amount of
rinse aid dispensed during the cycle is adjustable by moving the lever inside the
reservoir area.
For most water conditions use the manufacturer recommended
setting of “3”.
Adjust it up to the “MAX” setting for hard water.
Set the lever
anywhere between these amounts as needed to get the best results.
Replace
the cap and turn it clockwise to close.
M
A
X