Electrolux EDW7505HSS Complete Owner's Guide (English) - Page 7
Energy Option Selections, Operation Selections - control
UPC - 012505111419
View all Electrolux EDW7505HSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Operating Instructions 7 ENERGY OPTION SELECTIONS OPERATION SELECTIONS Sanitize To sanitize your dishes and glassware, select the SANITIZE option. SANITIZE touchpad will turn white. This option heats the water temperature in the final rinse to 157°F (69.4°C) and maintains that temperature for 7 minutes. SANITIZE is available in Auto, Heavy, and Normal cycles. Only these sanitization cycles have been designed to meet NSF requirements. The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C). If the SANITIZE option was selected, "SA" will be displayed at the end of the cycle. 'SA' will not display at the end of the cycle if the NSF requirements for sanitization are not reached. The sanitization criteria may not be satisfied if there is an interruption of the cycle, a power failure occurs, or if the incoming water temperature is below 120°F (49°C). To turn off the SANITIZE option, press SANITIZE a second time. SANITIZE touchpad will turn blue. Delay Time The Delay Time option allows you to automatically delay starting your dishwasher from 1 hour to 24 hours. Press the DELAY TIME touchpad until the desired delay time shows in the STATUS window press START/CANCEL to activate. Display will indicate the delay start time and will countdown until cycle starts. To cancel the DELAY TIME option and begin the cycle before the delay period is over, press the START/CANCEL touchpad. Child Lock Controls To prevent children from accidently starting the dishwasher, lock the dishwasher controls by pressing and releasing the AIR DRY touchpad for 3 seconds. All the buttons except AIR DRY will be OFF and the display will indicate "Loc" and no new selections can be made until the lock is released. To unlock the controls, press the AIR DRY touchpad for 3 seconds, the unit will display the last cycle ran.