Electrolux EFLS627UIW Installation Instructions English - Page 6
Clearance requirements, IMPORTANT
View all Electrolux EFLS627UIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 Installation Requirements 96" (244 cm) max. 24" (61 cm) min. 3" (7.6cm) 60 sq. in. (387.1cm²) NOTE Drain hose length is 59 in. (150 cm). For installations requiring a longer drain hose, use hose P/N 137098000, available from an authorized parts distributor. Clearance requirements IMPORTANT DO NOT INSTALL YOUR WASHER: 1. In an area exposed to dripping water or outside weather conditions. 2. In an area where gasoline or other flammables are kept or stored. If the washer is installed in a garage, it must be a minimum of 18 inches (45.7 cm) above the floor. 3. On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.5 cm). To minimize vibration or movement, reinforcement of the floor may be necessary. 60 sq. in. (387.1cm²) 3" (7.6cm) closet door MINIMUM INSTALLATION CLEARANCES - Inches (cm) SIDES REAR TOP FRONT Alcove 0" (0 cm) 0" (0 cm) 0" (0 cm) n/a UnderCounter 0" (0 cm) 0" (0 cm) 0" (0 cm) n/a Closet 0" (0 cm) 0" (0 cm) 0" (0 cm) 1" (2.5 cm) 0" (0 cm) 0" (0 cm) Installation in a recess or closet If washer and dryer are installed in the same closet, door ventilation is required: A minimum of 120 square inches (774.2 cm²) of opening, equally divided at the top and bottom of the door, is required. Louvered openings should be located 3 inches (7.6 cm) from bottom and top of door. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. 1" (2.5 cm) 0" (0 cm)